Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/galkan/crowbar

Crowbar is brute forcing tool that can be used during penetration tests. It is developed to support protocols that are not currently supported by thc-hydra and other popular brute forcing tools.
https://github.com/galkan/crowbar

Last synced: about 1 month ago
JSON representation

Crowbar is brute forcing tool that can be used during penetration tests. It is developed to support protocols that are not currently supported by thc-hydra and other popular brute forcing tools.

Awesome Lists containing this project

README 

        
## Crowbar - Brute forcing tool



### What is Crowbar?



**Crowbar** _(formally known as Levye)_ is a brute forcing tool that can be used during penetration tests. It was developed to brute force some protocols in a different manner according to other popular brute forcing tools. As an example, while most brute forcing tools use username and password for SSH brute force, Crowbar uses SSH key(s). This allows for any private keys that have been obtained during penetration tests, to be used to attack other SSH servers.



Currently **Crowbar** supports:



- OpenVPN (`-b openvpn`)

- Remote Desktop Protocol (RDP) with NLA support (`-b rdp`)

- SSH private key authentication (`-b sshkey`)

- VNC key authentication (`-b vpn`)



- - -



### Installation



**Kali Linux users can do**



```

# sudo apt install -y crowbar

```



Else if you wish to install from source, install all the dependencies:



**Debain 9/10+ & Kali Rolling**



```

# sudo apt install -y nmap openvpn freerdp2-x11 tigervnc-viewer   python3 python3-pip

```



**Debain 7/8 & Kali 1/2**



```

# sudo apt-get install -y nmap openvpn freerdp-x11 vncviewer

```



Then get latest version from GitHub:



```

# git clone https://github.com/galkan/crowbar

# cd crowbar/

# pip3 install -r requirements.txt

```



Note: The RDP client package depends on your OS:



- Debain 9/10 & Kali Rolling uses `freerdp2-x11`

- Debian 7/8 & Kali 1/2 uses `freerdp-x11` package.

- Else you can try `xfreerdp`.

- The fall back method would be to compile & tweak `freerdp` by following: http://opentechnotes.blogspot.co.uk/2015/02/compile-headless-freerdp-credential-checking.html



_Don't forget to patch `./lib/main.py` to point to the new binary_!



- - -



### Usage



- **-b**: Target service. Crowbar supports: `openvpn`, `rdp`, `sshkey`, `vnckey`

- **-c**: Static password to login with

- **-C**: `` for passwords list

- **-d**: Run a tcp port scan (nmap) on the IP range (`-s`/`-S`) before trying to brute force. This will discover whether the target's port is open

- **-D**: Enable debug mode

- **-h**: Shows a help menu

- **-k**: `` for key files (for SSH or VNC)

- **-l**: `` to store the log file (default is `./crowbar.log`)

- **-m**: `` for a OpenVPN configuration file

- **-n**: Thread count

- **-o**: `` to store the successfully attempt(s) (default is `./crowbar.out`)

- **-p**: Port number (if the service is not on the default port)

- **-q**: Enable quiet mode (only show successful logins)

- **-s**: Target IP address/range (in CIDR notation)

- **-S**: `` which is stores target IP addresses

- **-t**: Timeout value

- **-u**: Single username

- **-U**: `` which stores the username list

- **-v**: Enable verbose mode (shows all the attempts)



If you want see all usage options, please use: `./crowbar.py --help`.



- - -



**ATTENTION:** If you want to use username including DOMAIN, please specify username like below. Backslash (`\`) is the escape character for python. So you have to use either of the following two formats:



```

# ./crowbar.py -b rdp -u DOMAIN\\gokhan alkan -c Aa123456 -s 10.68.35.150/32

2015-03-28 11:03:39 RDP-SUCCESS : 10.68.35.150:3389 - "DOMAIN\gokhan alkan":Aa123456,

```



```

# ./crowbar.py -b rdp -u gokhan alkan@ornek -c Aa123456 -s 10.68.35.150/32

2015-03-28 11:04:00 RDP-SUCCESS : 10.68.35.150:3389 - "gokhan alkan@DOMAIN":Aa123456,

```



- - -



### Demonstration Videos



- https://www.youtube.com/watch?v=4QZAWGsveSM



- - -



### Brute Forcing - Remote Desktop Protocol (RDP)



Below are a few examples of attacking RDP using Crowbar.



RDP brute forcing a single IP address using a single username and a single password:



```

# ./crowbar.py -b rdp -s 192.168.2.182/32 -u admin -c Aa123456

```



![](https://raw.githubusercontent.com/galkan/crowbar/master/images/crowbar-rdp.jpg)



- - -



RDP brute forcing a single IP address using username list file and a single password:



```

# ./crowbar.py -b rdp -s 192.168.2.211/32 -U ~/Desktop/userlist -c passw0rd

```



![](https://raw.githubusercontent.com/galkan/crowbar/master/images/crowvar-rdp-dosya.jpg)



- - -



RDP brute forcing a single IP address using a single username and a password list:



```

# ./crowbar.py -b rdp -s 192.168.2.250/32 -u localuser -C ~/Desktop/passlist

```



![](https://raw.githubusercontent.com/galkan/crowbar/master/images/crowvar-rdp-dosya2.jpg)



- - -



RDP brute forcing a subnet using a username list and a password list in discovery mode:



```

# ./crowbar.py -b rdp -s 192.168.2.0/24 -U ~/Desktop/userlist -C ~/Desktop/passlist -d

```



![](https://raw.githubusercontent.com/galkan/crowbar/master/images/crowvar-rdp-kadi-parola-dosya.jpg)



- - -



### Brute Forcing - SSH Private Keys



Below are a few examples which you have using Crowbar.



SSH key brute force attempt to a single IP address using a single username and a single private SSH key:



```

# ./crowbar.py -b sshkey -s 192.168.2.105/32 -u root -k ~/.ssh/id_rsa

```



![](https://raw.githubusercontent.com/galkan/crowbar/master/images/crowbar-ssh1.jpg)



- - -



SSH key brute force attempt to a single IP address using a single username and all the SSH keys in a folder:



```

# ./crowbar.py -b sshkey -s 192.168.2.105/32 -u root -k ~/.ssh/

```



![](https://raw.githubusercontent.com/galkan/crowbar/master/images/crowbar-ssh2.jpg)



- - -



SSH key brute force attempt to a subnet using a single username and all the SSH keys in a folder in discovery mode:



```

# ./crowbar.py -b sshkey -s 192.168.2.0/24 -u root -k ~/.ssh/ -d

```



![](https://raw.githubusercontent.com/galkan/crowbar/master/images/crowbar-ssh3.jpg)



- - -



### Brute Forcing - VNC



Below is an example of attacking a VNC service using Crowbar.



VNC brute force attempt to a single IP address using a password file with specified port number:



```

# ./crowbar.py -b vnckey -s 192.168.2.105/32 -p 5902 -k ~/.vnc/passwd

```



![](https://raw.githubusercontent.com/galkan/crowbar/master/images/crowbar-vnc.jpg)



- - -



### Brute Forcing - OpenVPN



Below is an example of attacking OpenVPN using Crowbar.



OpenVPN brute force attempt to a single IP address using a configuration file, a single username and a single password with specified port number and optional certificate file. Doesn't matter if its TCP or UDP:



```

# grep remote ~/Desktop/vpnbook.ovpn

remote vpn.example.com 1194 udp

# host vpn.example.com | awk '{print $1}'

198.7.62.204

# grep '^auth-user-pass' ~/Desktop/vpnbook.ovpn

# ./crowbar.py -b openvpn -s 198.7.62.204/32 -p 1194 -m ~/Desktop/vpnbook.ovpn -k ~/Desktop/vpnbook_ca.crt -u vpnbook -c cr2hudaF

```



![](https://raw.githubusercontent.com/galkan/crowbar/master/images/crowbar-vpn.jpg)



- - -



### Logs & Output



Once you have executed Crowbar, it generates 2 files for logging and result that are located in your current directory. Default log file name is `crowbar.log` which stores all brute force attempts while execution. If you don't want use default log file, you should use `-l log_path`. The second file is `crowbar.out` which stores successful attempts while execution. If you don't want use default output file, you should use `-o output_path`. After that you can observe Crowbar operations.



You can make the output more verbose by doing `-v`, or even more information can be shown with `-vv`. If you're trying to troubleshoot an issue or potential bug, using `-D` will enable debug mode and will give a lot more output.



- - -



### Black Hat Sessions



- [![ToolsWatch 2014 Arsenal](https://rawgit.com/toolswatch/badges/master/arsenal/2014.svg)](https://www.blackhat.com/us-14/arsenal.html#Alkan)

- [![ToolsWatch 2015 Arsenal](https://rawgit.com/toolswatch/badges/master/arsenal/2015.svg)](http://www.blackhat.com/us-15/arsenal.html#heybe-pentest-automation-toolkit)



- - -



### Categories



- Network Attacks



- - -



### Code



- https://github.com/galkan/crowbar



- - -



### Lead Developer



- Gokhan Alkan - https://github.com/galkan



- - -



### Social Media



- [Twitter](https://twitter.com/gokhan_alkn)



- - -



### Thanks To



- Bahtiyar Bircan

- Ertuğrul Başaranoğlu

- [g0tmi1k](https://blog.g0tmi1k.com/)



- - -



### Bookmarks



- [Patator](https://github.com/lanjelot/patator) - A multi-purpose brute-forcer for protocols that are not supported by Crowbar

- [Debian OpenSSL Predictable PRNG](https://github.com/g0tmi1k/debian-ssh) - Weak predictable SSH keys for Debian based systems (2011)

- [ssh-badkeys](https://github.com/rapid7/ssh-badkeys) - A collection of static private SSH keys