https://github.com/galopago/rak-lora-adaptable-node-breakout-2aa
Breakout board for RAK811/RAK4200 LoRa adaptable nodes, small size, used when both AA battery holders were installed.
https://github.com/galopago/rak-lora-adaptable-node-breakout-2aa
hardware kicad lora lorawan lpwan open-hardware open-hardware-electronics pcb rak4200 rak811 rakwireless
Last synced: 3 months ago
JSON representation
Breakout board for RAK811/RAK4200 LoRa adaptable nodes, small size, used when both AA battery holders were installed.
- Host: GitHub
- URL: https://github.com/galopago/rak-lora-adaptable-node-breakout-2aa
- Owner: galopago
- License: cc-by-4.0
- Created: 2020-08-06T05:50:21.000Z (almost 5 years ago)
- Default Branch: master
- Last Pushed: 2020-10-11T04:39:17.000Z (over 4 years ago)
- Last Synced: 2025-01-14T02:29:38.196Z (4 months ago)
- Topics: hardware, kicad, lora, lorawan, lpwan, open-hardware, open-hardware-electronics, pcb, rak4200, rak811, rakwireless
- Homepage:
- Size: 444 KB
- Stars: 0
- Watchers: 1
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.rst
- License: LICENSE
Awesome Lists containing this project
README
=======================================================================================================================================
Breakout board for RAK811/RAK4200 LoRa adaptable nodes, small size, used when both AA battery holders were installed.
=======================================================================================================================================
Breakout board & prototype area to mount a few ( and small ) thru-hole components to interface LoRa node. Also can be used as a template for a custom interface board.
Read this in other languages: `Español `_
.. image:: /docs/pcb3d.png
Key features:
-------------
* Double sided traces and pads for added strength
* Prototype area with two parallel tracks connecting multiple pads, to be used as a power&ground rails
* Solder directly to the node's pcb using male header pins for a permanent, rigid and low height card
* Connect to the node's pcb using male-female pin header combination, for a more flexible solution
How to use this repository
--------------------------
The PCB was developed in KiCad V5.1,
Directory structure
-------------------
* The root folder contains KiCad files: project, schematic and PCB.
* gerber/single directory contains ready to manufacture files, for a single board.
* gerber/panel_100mmx100mm directory contains ready to manufacture files that fits in a 100mm x 100mm panel (use Vcuts!).
License
-------
.. image:: https://i.creativecommons.org/l/by/4.0/88x31.png
:target: http://creativecommons.org/licenses/by/4.0/
This is an Open Hardware project and is licensed under a `Creative Commons Attribution 4.0 International License, `_