https://github.com/gerryvel/nmea2000_tpw
BoatSensor for temperatur, pressure and winddata. Windata input NMEA0183 over WLAN. All data output to NMEA2000.
https://github.com/gerryvel/nmea2000_tpw
bmp280 bmp388 esp32 nmea0183 nmea2000
Last synced: about 1 year ago
JSON representation
BoatSensor for temperatur, pressure and winddata. Windata input NMEA0183 over WLAN. All data output to NMEA2000.
- Host: GitHub
- URL: https://github.com/gerryvel/nmea2000_tpw
- Owner: gerryvel
- Created: 2020-10-09T21:51:16.000Z (over 5 years ago)
- Default Branch: master
- Last Pushed: 2025-03-26T21:59:56.000Z (about 1 year ago)
- Last Synced: 2025-03-26T22:32:05.558Z (about 1 year ago)
- Topics: bmp280, bmp388, esp32, nmea0183, nmea2000
- Language: C
- Homepage:
- Size: 10.8 MB
- Stars: 4
- Watchers: 1
- Forks: 1
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
# Temperature, pressure and wind Data > NMEA2000
[](https://open-boat-projects.org/de/)
## Description
This repository shows how to measure the
- temperature
- barometric pressure
- Windspeed
- Winddirection
and send it as NNMEA2000 meassage.
- PGN 130306 // Wind
- PGN 130314 // Pressure
- PGN 130316 // Temperature
In addition, all data and part of the configuration are displayed as a website.
## Based on the work of
Idea and basics for this Pojekt is "NMEA2000-TempPressure" from [@AK-Homberger](https://github.com/AK-Homberger).
This repository shows how to measure and with a BMP280 or BMP388 sensor and send it to NMEA2000 network.
Additional work a Gateway with inputs NMEA0183 TCP-Stream from my Windsensor "NoWa" or "Yachta" [@norbert-walter](https://github.com/norbert-walter) and send to NMEA2000.
The project requires the NMEA2000 and the NMEA2000_esp32 libraries from Timo Lappalainen: https://github.com/ttlappalainen.
This project is part of [OpenBoatProject](https://open-boat-projects.org/)
## TPW Sensor Modul
For the BMP 280 and BMP388 the Adafruit BMP3xx library has to be installed via the library manager.
For HTML-Files use LittleFS Filesystem, you find her in /data directory.
The ESP32 in this project is an Adafruit Huzzah! ESP32. This is a small module without USB connector.
For the ESP32 CAN bus, i used the SN65HVD230 chip as transceiver. The correct GPIO ports are defined in the main sketch. For this project, I use the pins GPIO4 for CAN RX and GPIO5 for CAN TX.
The 12 Volt is reduced to 5 Volt with a DC Step-Down_Converter. 12V DC comes from the N2k Bus Connector with the M12 Connector.
Its the same wiring and PCB with BD Sensor, you can leave out unnecessary components.
## Wiring diagram
## PCB
Aisler PCB Layout [link](https://aisler.net/p/NZFHAMAJ)
## Hardware
## Partlist:
- C1 C10µ ~ Capacitor_Tantalum_SMD
- C2 C22µ ~ Capacitor_Tantalum_SMD
- D1 P4SMAJ26CA
- D2 B360 [Link](https://www.reichelt.de/schottkydiode-60-v-3-a-do-214ab-smc-b-360-f-p95202.html?&trstct=pos_1&nbc=1)
- D3 PRTR5V0U2X
- D4 PESD1CAN [Link](https://www.reichelt.de/can-bus-esd-schutzdiode-tvs-24-v-sot-23-3-pesd-1can-p219293.html?&trstct=pos_0&nbc=1)
- D5 LED_RBKG [Link](https://www.reichelt.de/led-5-mm-bedrahtet-4-pin-rot-gruen-blau-700-1300-300-mcd-60-kbt-l-154a4surkq-p231040.html?&trstct=pol_0&nbc=1)
- FL1 EPCO B82789C0513 [Link](https://www.reichelt.de/smd-power-induktivitaet-1812-51-h-epco-b82789c0513-p245680.html?&trstct=pos_0&nbc=1)
- J1 Conn_01x04_Socket
- J2,J3 Conn_01x04_Pin
- N1 Housing Wago 789-120 [Link](https://www.wago.com/de/zubehoer/gehaeuse-55-mm/p/789-120)
- R1 300R
- R2 10k
- U1 TSR_1-2450 [Link](https://www.reichelt.de/dc-dc-wandler-tsr-1-1-w-5-v-1000-ma-sil-to-220-tsr-1-2450-p116850.html?search=tsr+1-24)
- U2 ESP32-Huzzah [Link](https://www.exp-tech.de/plattformen/internet-of-things-iot/9350/adafruit-huzzah32-esp32-breakout-board)
- U3 SN65HVD230 [Link](https://www.reichelt.de/high-speed-can-transceiver-1-mbit-s-3-3-v-so-8-sn-65hvd230d-p58427.html?&trstct=pos_0&nbc=1)
- U4 BMP388 [Link](https://www.bluedot.space/products/bmp388/)
## Website
## Plotter
## Versions
- 2.5 Update and add website details
- 2.4 Update windvalues and add windsensortemp for N2k, website cosmetic
- 2.3 Update windvalues for N2k
- 2.2 Update read values from windsensor, Update PCB
- 2.1 Update website Gauge's
- 2.0 Complete Website update, Windsensor Stream read update (code and html files)
- 1.3 Update windsensor Wlan connect code
- 1.2 Update website
- 1.1 Update PCB
- 1.0 working Version