https://github.com/grimmpp/tank-prototype
https://github.com/grimmpp/tank-prototype
3d-printer tank
Last synced: 5 months ago
JSON representation
- Host: GitHub
- URL: https://github.com/grimmpp/tank-prototype
- Owner: grimmpp
- License: apache-2.0
- Created: 2019-05-06T21:13:40.000Z (about 7 years ago)
- Default Branch: master
- Last Pushed: 2019-12-21T19:32:12.000Z (over 6 years ago)
- Last Synced: 2025-05-14T01:59:15.126Z (about 1 year ago)
- Topics: 3d-printer, tank
- Language: OpenSCAD
- Size: 8.36 MB
- Stars: 0
- Watchers: 2
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
- License: LICENSE
Awesome Lists containing this project
README
# Tank Prototype v1
I got inspired by a tank project ProtoTank and by FPV Prototank with Turret
I reused a lot from ProtoTank and motified the parts a bit so that e.g. nuts and screw heads disappear in them. I also modified the tank tracks so that they've got more grip.
Unfortunately the tracks are a bit loose but it works. Next time I will choose a smaller diameter for the track parts.
As first draft I use an arduino uno and a motor driver shield from Adeept like in the project radio-controlled-arduino-devices, especially from the vehicle 4WD Car based on Adeept Board. I used exactly the same software because also the 4WD car has got 4 TT-Motors and works the same way.
**Part list:**
1x simpleBaseFrame.stl
2x ProtoTank_trackinnerFrame2.stl
2x ProtoTank_TrackOuterFrame2.stl
64x stud.stl
64x track2.stl
All screws and nuts are changed to M3.
Same tank with simpleBaseFrame2_5cm.stl
