https://github.com/hugokernel/openscad-screen-case

Parametric screen case built with OpenSCAD.
https://github.com/hugokernel/openscad-screen-case

openscad waveshare waveshare-eink

Last synced: 25 days ago
JSON representation

Parametric screen case built with OpenSCAD.

• Host: GitHub
• URL: https://github.com/hugokernel/openscad-screen-case
• Owner: hugokernel
• Created: 2021-01-11T07:09:07.000Z (about 5 years ago)
• Default Branch: master
• Last Pushed: 2021-01-18T08:09:28.000Z (about 5 years ago)
• Last Synced: 2025-09-07T07:32:31.948Z (6 months ago)
• Topics: openscad, waveshare, waveshare-eink
• Language: OpenSCAD
• Homepage:
• Size: 748 KB
• Stars: 9
• Watchers: 1
• Forks: 3
• Open Issues: 0
• Metadata Files:
  • Readme: README.md

Awesome Lists containing this project

README

          
# OpenSCAD Screen Case

This is a OpenSCAD for screen case and specially the [e-ink Waveshare 7.5" screen](https://www.waveshare.com/product/displays/e-paper/7.5inch-e-paper.htm).

## Features

* Low profile

* Wall mounting system

* Openings to add modules such as buttons

* It is designed to be usable with other displays.

![Photo of front](images/front.jpg)

![Photo of back](images/back.jpg)

## Design

The case consists of 2 main parts, a front panel that will support the screen and a case that will contain the electronics.

The 2 parts fit together and are held together by 4 screws in the corners of the case.

The 4 M2 screws are screwed into M2x4x3.5 inserts (see picture).

![Photo of inserts position](images/front-back.png)

### Gadgets

If you need to add things to the box, you can do so via gadgets that will be inserted into the box.

![Gadgets case](images/case.png)

You can add a gadget with 2 buttons using 2 micro-switches Omron D2F-01F-T (see image below).

![Photo of switch gadget](images/gadget-switch.png)

## Requirements

### Prints

You will only need to print 2 pieces and depending if you want buttons choose the associated gadgets.

* [case.stl](stl/case.stl)

* [front.st](stl/front.stl)

* Gadgets:

  * [gadget.stl](stl/gadget.stl) x4 if you do not want button

  * [gadget.stl](stl/gadget.stl) x3 and [gadget-button.stl](stl/gadget-button.stl) + [button.stl](stl/button.stl) x2 if you want one button gadget

### Pieces

* Insert M2X4X3.5 x4

* M2 x 5mm screws x2

* If you want to use button, you need switch (Omron D2F-01F-T)