https://github.com/hzeller/rpt2paste
Convert KiCAD rpt files to G-Code to dispense solder paste
https://github.com/hzeller/rpt2paste
Last synced: 7 months ago
JSON representation
Convert KiCAD rpt files to G-Code to dispense solder paste
- Host: GitHub
- URL: https://github.com/hzeller/rpt2paste
- Owner: hzeller
- Created: 2014-03-27T01:04:23.000Z (over 11 years ago)
- Default Branch: master
- Last Pushed: 2014-10-02T16:23:23.000Z (about 11 years ago)
- Last Synced: 2025-03-18T16:22:35.620Z (7 months ago)
- Language: C++
- Size: 317 KB
- Stars: 24
- Watchers: 9
- Forks: 5
- Open Issues: 2
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
**Note, this project is now superseded by https://github.com/hzeller/rpt2pnp
which does solder dispensing as well as pick and placing**
KiCAD RPT file to G-Code for didspensing solder paste.
There are probably better ways. This is mostly experimental, working with a solder-paste dispenser
hooked up to the fan-output of https://github.com/jerkey 's Type-A 3D printer.
The bumps.rpt file is for testing, created from https://github.com/hzeller/bumps project.
lead solder paste (zephpaste), 27gauge needle (grey), 60 PSI, -d 250 -D 3024
lead solder paste (zephpaste), 0.78mm needle (teal), 60 PSI, -d 235.40 -D 132.74
![Postscript Output][route]
[route]: https://github.com/hzeller/rpt2paste/raw/master/img/bumps-paste.png