https://github.com/iansan5653/strap-clip

Clip to hold dangling backpack straps
https://github.com/iansan5653/strap-clip

Last synced: 5 months ago
JSON representation

Clip to hold dangling backpack straps

• Host: GitHub
• URL: https://github.com/iansan5653/strap-clip
• Owner: iansan5653
• License: cc0-1.0
• Created: 2022-07-30T00:49:32.000Z (over 3 years ago)
• Default Branch: master
• Last Pushed: 2022-07-30T19:18:52.000Z (over 3 years ago)
• Last Synced: 2025-02-02T00:45:26.818Z (11 months ago)
• Size: 596 KB
• Stars: 4
• Watchers: 1
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: readme.md
  • License: license.md

Awesome Lists containing this project

README

          
## Backpack Strap Clip

A simple 3d printed clip to hold long backpack straps so they don't flap around.

![Picture of the clips in use. They are shaped like an elongated "C" and will hold three layers of webbing together.](./photo.jpg)

This model fits about three layers of 1-inch wide straps. It prints in under 10 minutes - I used PETG but PLA would probably work just fine.

**Download**: [3MF](./clip.3MF), [STL](./clip.STL)

![Dimensioned drawing of the part. The clip is a 1/16 inch thick by 1/4 inch wide strip of plastic bent into a long C shape with semicircular ends. The shape has a maximum internal length of 1 inch, an internal height of 1/4 inch, and a 1/2 inch wide opening.](./drawing.PNG)

_No rights reserved:_ This project is released under the [Creative Commons CC0](https://creativecommons.org/share-your-work/public-domain/cc0/) license.