https://github.com/imbushuo/NintendoSwitchPkg

WIP UEFI EDK2 Implementation for Nintendo Switch or generic Tegra210 platforms
https://github.com/imbushuo/NintendoSwitchPkg

aarch64 armv8 edk2 nintendo-switch uefi

Last synced: 3 months ago
JSON representation

WIP UEFI EDK2 Implementation for Nintendo Switch or generic Tegra210 platforms

• Host: GitHub
• URL: https://github.com/imbushuo/NintendoSwitchPkg
• Owner: imbushuo
• License: gpl-2.0
• Created: 2018-12-28T15:40:26.000Z (almost 6 years ago)
• Default Branch: master
• Last Pushed: 2021-07-05T00:10:52.000Z (over 3 years ago)
• Last Synced: 2024-07-18T03:42:19.880Z (4 months ago)
• Topics: aarch64, armv8, edk2, nintendo-switch, uefi
• Language: C
• Homepage:
• Size: 332 KB
• Stars: 265
• Watchers: 28
• Forks: 19
• Open Issues: 19
• Metadata Files:
  • Readme: README.md
  • License: LICENSE

Awesome Lists containing this project

README

        
# EDK2 Implementation for Nintendo Switch (Tegra210)

## Status

Capable to boot something from SD card. If you have a Linux kernel with EFI stub support, supply the device tree for any Tegra210 device (not limited to Nintendo Switch) should boot.

ACPI also boots Windows and Linux, but limited devices are provided (only CPU at this moment).

## Device Support

- CPU services: GIC and Arch Timer.

- Clocks (reset, PLL, etc.)

- Power Management (PMC, PMIC & regulators, etc.)

- GPIO and Pin Multiplexor.

- MicroSD (should support SDSC, HC. XC probed and have partition table shown, but not intensively tested). eMMC support will be added soon.

- Screen and FrameBuffer (need special [Coreboot](https://github.com/imbushuo/Coreboot))

- Side-band buttons, not yet registered as EFI Input Device.

- UART (Right Joy Con, 115200, 8n1)

## Windows Kernel Debugger Enablement

    bcdedit /store E:\EFI\Microsoft\Boot\BCD /set {default} debug on

    bcdedit /store E:\EFI\Microsoft\Boot\BCD /dbgsettings serial debugport:1 baudrate:115200

    

Plug in connector on the right-side Joy Con and connect to PC. Use WinDbg serial connection and it should work.

## Planned / In-Progress

- EHCI USB host

- eMMC

- Sideband buttons as input device

- Joy-Con (maybe not. Need high speed serial)

## Building

See [Lumia950XLPkg](https://github.com/WOA-Project/Lumia950XLPkg). Almost identical!