https://github.com/itdaniher/thundermaus

Repository for "Intro To Plasma's" spin on the "ThunderMouse" singing tesla coil.
https://github.com/itdaniher/thundermaus

Last synced: 21 days ago
JSON representation

Repository for "Intro To Plasma's" spin on the "ThunderMouse" singing tesla coil.

• Host: GitHub
• URL: https://github.com/itdaniher/thundermaus
• Owner: itdaniher
• Created: 2012-11-29T02:29:15.000Z (almost 12 years ago)
• Default Branch: master
• Last Pushed: 2013-03-11T17:42:14.000Z (over 11 years ago)
• Last Synced: 2024-04-16T06:59:48.675Z (7 months ago)
• Language: C
• Size: 492 KB
• Stars: 1
• Watchers: 2
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.mkd

Awesome Lists containing this project

README

        
## ThunderMaus Tesla Coil

Original design by [Steve Ward](http://www.arcattack.com/about.php), modified by the Intro to Plasma gang, Eric VanWyk, Dane Koutron, and Ian Daniher.



	Some input/output descriptions:

	

	PA0		not used

	PA1		not used

	PA2		signal voltage for analog input

	PA3		potentiometer 1 voltage input (controls pulse width)

	PA4		programming pin

	PA5		programming pin

	PA6		programming pin

	PA7		potentiometer 2 voltage input (controls frequency for timer)

	

	PB0		LED

	PB1		gate squeltch - low = pull to 16v, high = gate feedback loop / oscillator enabled

	PB2		coil squeltch - low = pull to 16v, high = coil output squeltch

	PB3		RESET (programming pin)

	

	when programming the chip, set internal oscillator for 8MHZ, and BOD to 4.3V.