https://github.com/japersik/go-rpi-cam-control

RaspberryPi camera control via web interface
https://github.com/japersik/go-rpi-cam-control

raspberry raspberry-pi raspberry-pi-camera rpi4

Last synced: about 2 months ago
JSON representation

RaspberryPi camera control via web interface

• Host: GitHub
• URL: https://github.com/japersik/go-rpi-cam-control
• Owner: japersik
• Created: 2021-12-03T19:33:33.000Z (about 3 years ago)
• Default Branch: master
• Last Pushed: 2022-05-13T10:01:11.000Z (over 2 years ago)
• Last Synced: 2024-10-11T16:41:16.122Z (3 months ago)
• Topics: raspberry, raspberry-pi, raspberry-pi-camera, rpi4
• Language: Go
• Homepage:
• Size: 1.93 MB
• Stars: 1
• Watchers: 1
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md

Awesome Lists containing this project

README

        
# RaspberryPi camera web controller

## Web interface to control the raspberry pi camera

![RPi camera](img/img_0.png)

## Control

Access to the control panel and the album is carried out after authorization. There are buttons on the control panel to control the position of the camera and to take a photo. Immediately after shooting, the new photo is displayed next to the control panel. All photos taken are displayed in the album.

![RPi web interface](img/img_1.png)

## Settings

The path to the configuration file is declared by the flag  `-configs-path [path]` (default `configs/serverConf.toml`).

```toml

[server_config]

bind_addr = ":8080"                 # web server binding port

log_level = "debug"                 # log level

session_key = "[session_key]"       #

[camera_config]

[servo_config]

gpio_x = 12                         # gpio pin for connecting a servo to move the camera along the x-axis

gpio_y = 19                         # gpio pin for connecting a servo to move the camera along the y-axis

inverse_x = true                    # servo-x direction inversion

inverse_y = false                   # servo-y direction inversion

[user_store]

auth_file = "users.json"            # file where logins and encrypted passwords are stored during restart

new_user_key = "[new_user_key]"     # passcode to enter when registering a new user 

```

## Camera mount

You can download my model for attaching a standard camera to the SG90 servo drive [here](https://www.thingiverse.com/thing:4710301).