https://github.com/jgroman/octoprint-psucontrol-tendabeli
Adds Tenda Beli SP3 support to OctoPrint-PSUControl as a sub-plugin.
https://github.com/jgroman/octoprint-psucontrol-tendabeli
octoprint-plugin
Last synced: 2 months ago
JSON representation
Adds Tenda Beli SP3 support to OctoPrint-PSUControl as a sub-plugin.
- Host: GitHub
- URL: https://github.com/jgroman/octoprint-psucontrol-tendabeli
- Owner: jgroman
- License: agpl-3.0
- Created: 2021-05-03T16:38:39.000Z (about 4 years ago)
- Default Branch: master
- Last Pushed: 2021-05-20T10:30:39.000Z (almost 4 years ago)
- Last Synced: 2025-01-20T05:37:23.072Z (4 months ago)
- Topics: octoprint-plugin
- Language: Python
- Homepage:
- Size: 28.3 KB
- Stars: 2
- Watchers: 2
- Forks: 2
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
- License: LICENSE
Awesome Lists containing this project
README
# OctoPrint PSU Control - Tenda Beli SP3
Adds Tenda Beli SP3 support to OctoPrint-PSUControl as a sub-plugin.
This plugin is based on [OctoPrint PSU Control - Tasmota](https://github.com/kantlivelong/OctoPrint-PSUControl-Tasmota) plugin code by [Shawn Bruce](https://github.com/kantlivelong).
## Setup
- Install via the bundled [Plugin Manager](https://docs.octoprint.org/en/master/bundledplugins/pluginmanager.html)
or manually using this URL: https://github.com/jgroman/OctoPrint-PSUControl-TendaBeli/archive/master.zip
## Configuration
- Configure this plugin: set smart plug IP address
- Select this plugin as a Switching and/or Sensing method in [PSU Control](https://github.com/kantlivelong/OctoPrint-PSUControl)
## Notes
- Plugin was tested with plugs:
- HW version EU V1.0, SW version V1.1.0.13(115)_SP3_EU
- HW version AU V1.0, SW version V1.1.0.13(115)_SP3_AU
- Tenda Beli SP3 smart plug can be configured using official Tenda Beli app.
- If you prefer not connecting your SP3 smart plug to any cloud, it is also possible to provision your device manually:
1. Unpack new device or reset existing device by holding the Power On/Reset button for more than 6 seconds.
1. Connect to open WLAN provided by this plug
1. Find out smart plug IP address (= WLAN gateway)
1. Run command `curl -X POST http://PLUG-IP:5000/guideDone -d '{"account":"1","key":"YOUR-WLAN-KEY","server":"beli.intranet","ssid":"YOUR-WLAN-SSID"}'`
1. Smart plug will reset and connect to provided WLAN.