https://github.com/joch/deconz-docker
Run deconz in Docker
https://github.com/joch/deconz-docker
home-assistant home-automation zigbee zigbee-gateway
Last synced: about 1 year ago
JSON representation
Run deconz in Docker
- Host: GitHub
- URL: https://github.com/joch/deconz-docker
- Owner: joch
- Created: 2018-02-04T16:25:47.000Z (over 8 years ago)
- Default Branch: master
- Last Pushed: 2019-01-31T19:30:35.000Z (over 7 years ago)
- Last Synced: 2025-04-13T22:13:13.294Z (about 1 year ago)
- Topics: home-assistant, home-automation, zigbee, zigbee-gateway
- Language: Dockerfile
- Size: 6.84 KB
- Stars: 9
- Watchers: 2
- Forks: 2
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
# deCONZ in Docker
Please use [marthoc/deconz](https://github.com/marthoc/deconz) if you need faster updates to the Docker image.
This will run deCONZ in Docker. Please follow the following command (or equivalent) to launch the deCONZ container:
```
docker run -d --name="deconz" --net="host" -e TZ="Europe/Berlin" -p 8080:8080/tcp -v "/[appdata folder]/deconz":"/root/.local/share/dresden-elektronik/deCONZ":rw --device /dev/ttyUSB0:/dev/ttyUSB0 joch/deconz
```
UPNP discovery is disabled in this container, so to use deconz and Phoscon, use the following URLS:
- deconz: http://[ip]:8080/
- phoscon: http://[ip]:8080/pwa/
You can change the default port from 8080 by providing the environment variable `DECONZ_WEB_PORT` like this:
```
docker run -d --name="deconz" --net="host" -e TZ="Europe/Berlin" -e DECONZ_WEB_PORT=8090 -p 8090:8090/tcp -v "/[appdata folder]/deconz":"/root/.local/share/dresden-elektronik/deCONZ":rw --device /dev/ttyUSB0:/dev/ttyUSB0 joch/deconz
```
The same goes for deconz web sockets port `DECONZ_WS_PORT`
Please open an issue if you find any issues running this.
## Updating the firmware
When upgrading to a new version, you will usually be prompted to update the firmware of the conbee stick as well. To find the firmware file to use, just replace the hex value below with what deconz/phoscon tells you to update to. Follow this procedure:
```
docker stop deconz
rmmod ftdi_sio
docker run --rm -ti --privileged=true --device /dev/ttyUSB0:/dev/ttyUSB0 -v /dev/bus/usb:/dev/bus/usb joch/deconz GCFFlasher_internal -d 0 -f /usr/share/deCONZ/firmware/deCONZ_Rpi_0x261d0500.bin.GCF
```
It will output the following (ignore the not found warnings, it’s fine):
```
/usr/bin/GCFFlasher_internal: 9: /usr/bin/GCFFlasher_internal: rmmod: not found
/usr/bin/GCFFlasher_internal: 10: /usr/bin/GCFFlasher_internal: rmmod: not found
GCFFlasher V2_11 (c) dresden elektronik ingenieurtechnik gmbh 2017/12/10
using firmware file: /usr/share/deCONZ/firmware/deCONZ_Rpi_0x261d0500.bin.GCF
reset via FTDI
flashing 123252 bytes: |=============================|
verify: ....
SUCCESS
/usr/bin/GCFFlasher_internal: 14: /usr/bin/GCFFlasher_internal: modprobe: not found
/usr/bin/GCFFlasher_internal: 15: /usr/bin/GCFFlasher_internal: modprobe: not found
```
Then restart:
```
modprobe ftdi_sio
docker restart deconz
```
Now your Conbee stick should be updated and you should be ready to go.
## Example using docker-compose:
This example shows how to using this image with docker-compose.
```yaml
deconz:
container_name: deconz
hostname: deconz
image: joch/deconz
restart: always
environment:
- TZ="Europe/Stockholm"
- DECONZ_WEB_PORT=8080 # This is the default web (http) port
- DECONZ_WS_PORT=443 # This is the default web sockets port
ports:
- "8080:8080"
- "443:443"
volumes:
- /deconz:/root/.local/share/dresden-elektronik/deCONZ:rw
devices:
- /dev/ttyUSB0:/dev/ttyUSB0
```