https://github.com/kb2ma/riot-nano-cli
nanocoap CLI for RIOT
https://github.com/kb2ma/riot-nano-cli
Last synced: 2 months ago
JSON representation
nanocoap CLI for RIOT
- Host: GitHub
- URL: https://github.com/kb2ma/riot-nano-cli
- Owner: kb2ma
- Created: 2018-05-10T05:15:34.000Z (about 7 years ago)
- Default Branch: master
- Last Pushed: 2018-09-28T03:31:22.000Z (over 6 years ago)
- Last Synced: 2025-01-28T21:46:43.428Z (4 months ago)
- Language: C
- Size: 8.79 KB
- Stars: 0
- Watchers: 2
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README-slip.md
Awesome Lists containing this project
README
`Makefile.slip` assumes use of a SAMR21 Xplained Pro. This file describes how we use the board as a border router. See the [SLIP instructions][1] for the gnrc_border_router example for more background.
## Background -- Building
Build commands, for reference:
make clean BOARD="samr21-xpro"
# Use -f only for border router!
make -f Makefile.slip BOARD="samr21-xpro"
../../dist/tools/usb-serial/list-ttys.sh
# Use -f only for border router!
make -f Makefile.slip flash BOARD="samr21-xpro" SERIAL="???"
make term BOARD="samr21-xpro" PORT="/dev/ttyACM???"
## USB serial port
The USB serial port requires a USB-TTL converter cable with 3.3 V output.
Pin connections for SAMR21 board:
* PA23 (RX) -- TXD wire
* PA22 (TX) -- RXD wire
* GND -- GND wire
## Network configuration
We will define two networks:
1. `bbbb` Between Border Router (BR) and Ubuntu host over TUN
2. `aaaa` Between RIOT router node and BR over 6LoWPAN
We include two approaches to configuration below, automated via RPL, and manual via fib.
First, define a TUN interface on an Ubuntu host with tunslip, in the `dist/tools/tunslip` directory. In the example below, the tun interface is host 1.
cd ../../dist/tools/tunslip/
sudo ./tunslip6 -s ttyUSB0 -t tun0 bbbb::1/64
sudo ip -6 route add aaaa::/64 dev tun0
### RPL-based configuration
Configure the interface to the `bbbb` network on the BR from the RIOT terminal. The example commands below assume SLIP is on interface 8.
# Set address for SLIP interface
ifconfig 7 add unicast bbbb::2/64
# Add the Ubuntu host to the neighbor cache
nib neigh add 7 bbbb::1
Next configure the interface for the `aaaa` network on the BR. Strictly speaking, it is not necessary to define this address. However, it is convenient for typing, because RIOT automatically creates a more verbose address based on the MAC address for the interface.
ifconfig 7 add unicast aaaa::1/64
rpl init 7
Next, configure the interface on the `aaaa` network on the RIOT router mote.
ifconfig 7 add unicast aaaa::2/64
rpl init 7
Finally, set the BR as the RPL DAG root.
rpl root 1 aaaa::1
Ping the TUN interface from the router mote, via the BR:
ping6 bbbb::1
[1]: https://github.com/RIOT-OS/RIOT/tree/master/examples/gnrc_border_router "SLIP instructions"