https://github.com/kenbell/tamago-example-pizero

https://github.com/kenbell/tamago-example-pizero

Last synced: about 2 months ago
JSON representation

• Host: GitHub
• URL: https://github.com/kenbell/tamago-example-pizero
• Owner: kenbell
• Created: 2020-08-01T17:28:25.000Z (over 4 years ago)
• Default Branch: main
• Last Pushed: 2021-03-27T16:21:46.000Z (almost 4 years ago)
• Last Synced: 2024-10-14T08:13:33.848Z (3 months ago)
• Language: Go
• Size: 12.7 KB
• Stars: 4
• Watchers: 0
• Forks: 4
• Open Issues: 1
• Metadata Files:
  • Readme: README.md

Awesome Lists containing this project

README

        
# Tamago Example for Pi Zero

This is an example 'hello world' type application that runs on the Raspberry Pi Zero.  The example just flashes the on-board activity LED.  Connect a UART cable to see diagnostic output.

## Prerequisites

To use this example, you need:

* A FAT-formatted micro-SD card with the Raspberry Pi bootloader present (`bootcode.bin`, `start.elf`, `fixup.dat`)

## Build & install example

```sh

export TAMAGO=~/work/tamago-go/bin/go

export CROSS_COMPILE=arm-linux-gnueabi-

export INSTALLDIR=/mnt/sdcard

make install

```

The install target will perform these steps:

1. Compile the example using TAMAGO Go compiler

2. Copy these files to the SD card:

    * `config.txt`          (the Pi config to load the example as a 'kernel')

    * `example-pi-zero.bin` (the example)