https://github.com/kirby-b/arduino-morse-code

A small collection of Morse code messages on an Arduino
https://github.com/kirby-b/arduino-morse-code

arduino arduino-sketch arduino-uno cplusplus instructions microcontroller morse-code

Last synced: about 2 months ago
JSON representation

A small collection of Morse code messages on an Arduino

• Host: GitHub
• URL: https://github.com/kirby-b/arduino-morse-code
• Owner: kirby-b
• License: mit
• Created: 2023-05-30T00:59:53.000Z (over 1 year ago)
• Default Branch: master
• Last Pushed: 2024-04-09T15:24:11.000Z (9 months ago)
• Last Synced: 2024-04-10T05:49:58.601Z (9 months ago)
• Topics: arduino, arduino-sketch, arduino-uno, cplusplus, instructions, microcontroller, morse-code
• Language: C++
• Homepage:
• Size: 233 KB
• Stars: 0
• Watchers: 1
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md
  • License: LICENSE

Awesome Lists containing this project

README

        
# Arduino Morse Code

A small collection of Morse code messages on an Arduino

# Instructions

Build the arduino with the parts described in the model sketch. To be very specific I used

1. An Elegoo Arduino uno r3

2. A 830 Tie-points Breadboard

3. 5 mm red led light (long bit on the side of the resistor)

4. 220 ohm resistor

6. 2 Black M-M wires

7. 1 Red M-M wire





Next you need to run the sketch of your choice in the Arduino IDE and upload it to your connected board