https://github.com/kk6axq/powermonitor

A power management board for small robotics applications
https://github.com/kk6axq/powermonitor

Last synced: 3 months ago
JSON representation

A power management board for small robotics applications

• Host: GitHub
• URL: https://github.com/kk6axq/powermonitor
• Owner: kk6axq
• License: gpl-3.0
• Created: 2021-03-29T05:45:55.000Z (about 4 years ago)
• Default Branch: main
• Last Pushed: 2021-09-24T02:20:41.000Z (over 3 years ago)
• Last Synced: 2025-01-14T15:20:47.194Z (5 months ago)
• Language: HTML
• Size: 2.61 MB
• Stars: 0
• Watchers: 2
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md
  • License: LICENSE

Awesome Lists containing this project

README

        
# Power Monitor

This is a power management board for small robotics applications. This project was

developed as part of an honors contract for EGR216, electrical fundamentals,

during my Spring 2021 semester at Arizona State University, under the guidance

of Dr. Ayan Mallik.



# Purpose

The purpose of this project was to interface with a LiPo battery for a robotics

project I am developing in another course. The purpose of the board was to

prevent issues stemming from over discharge of the battery or accidental shorting.

As LiPo batteries are capable of delivering a large amount of current,

I wanted to prevent circuit damage in the case of short circuit conditions while

also preventing battery damage if I forgot to turn off the robot.

Additionally, I wanted to explore an alternative to the LM7805 I had used in

previous projects to provide a high current 5V supply for a planned payload bay

on the robot.

# Features

* Variety of current protection features:

  * Overcurrent up to 10A

  * Overvoltage detection up to 25V

  * Undervoltage detection

  * Short circuit protection

* Independent load control. Load, and 5V load supply can be switched on or off by the onboard microcontroller.

* Provides 5V at up to 3A and 12V at up to 10A burst.

* Dual power supplies for load and onboard microcontroller.

* Serial based monitoring and control of load switch, power status, and fault conditions.

* Onboard RGB LED for status indication

* Open source software.

* Hardware schematic and layout is open source. Project files are currently not available due to licensing restrictions.

# Design Criteria

* 12V power source or 3s LiPo battery

* Provide 12V at 4.2A from battery and 5V at 1.5A

* Monitor for fault conditions, including overvoltage, undervoltage, overcurrent, and short circuit

* Report faults to the robot's main microcontroller

# Core components:

* ATTiny88 microcontroller programmed with Arduino and the ATTinyCore

* ACS722 Current Sensor with +/- 10A current measuring capacity

* Voltage divider based voltage sensor with 25V measuring capability

* Dual LM2576 5V buck converter

* MIC5504 3.3V regulator for current sensor

* Si4435 P-Channel MOSFET for short circuit protection and load switching



# Repository Structure:

The repository is organized by folder, as shown below.

## Hardware

The hardware folder contains the KiCAD project files and output Gerbers and PDFs

for easy viewing. It includes:

* PDF schematic

* STEP file of PCB

* Bill of Materials

* Interactive HTML BOM for PCB assembly

* KiCAD project files

* Archive of Gerber board files and PDF of PCB layers

## Software

The software folder contains the code used to enable the power management behaviors.

## Docs

The docs folder contains documentation of the digital communications protocol and an explanation of the operation of the device.

# License

This project is copyright (C) 2021 by Lukas Severinghaus. It is licensed under the GNU GPLV3.