https://github.com/kleinesfilmroellchen/train-signalling

https://github.com/kleinesfilmroellchen/train-signalling

Last synced: 25 days ago
JSON representation

• Host: GitHub
• URL: https://github.com/kleinesfilmroellchen/train-signalling
• Owner: kleinesfilmroellchen
• License: apache-2.0
• Created: 2024-04-09T21:26:14.000Z (7 months ago)
• Default Branch: main
• Last Pushed: 2024-04-22T11:50:18.000Z (7 months ago)
• Last Synced: 2024-05-01T16:18:10.793Z (6 months ago)
• Language: Rust
• Size: 1.08 MB
• Stars: 2
• Watchers: 2
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md
  • License: LICENSE-APACHE

Awesome Lists containing this project

README

        
train-signalling

================

Train signal controller that receives commands via Serial and sets up its connected signals accordingly. Just a little demo thing I might need in a little while.

## Build Instructions

1. Install prerequisites as described in the [`avr-hal` README] (`avr-gcc`, `avr-libc`, `avrdude`, [`ravedude`]).

2. Run `cargo build` to build the firmware.

3. Run `cargo run` to flash the firmware to a connected board.  If `ravedude`

   fails to detect your board, check its documentation at

   .

4. `ravedude` will open a console session after flashing where you can interact

   with the UART console of your board.

[`avr-hal` README]: https://github.com/Rahix/avr-hal#readme

[`ravedude`]: https://crates.io/crates/ravedude

## License

Licensed under either of

 - Apache License, Version 2.0

   ([LICENSE-APACHE](LICENSE-APACHE) or )

 - MIT license

   ([LICENSE-MIT](LICENSE-MIT) or )

at your option.

## Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted

for inclusion in the work by you, as defined in the Apache-2.0 license, shall

be dual licensed as above, without any additional terms or conditions.