Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/klich3/opencore-0.6.0-asus-p8z68-deluxe

Opencore USB Launcher for Asus P8z68 Mother Board
https://github.com/klich3/opencore-0.6.0-asus-p8z68-deluxe

asus efi hackintosh opencore p8z68

Last synced: about 1 month ago
JSON representation

Opencore USB Launcher for Asus P8z68 Mother Board

Awesome Lists containing this project

README 

        
# ASUS P8Z68 - DELUXE Catalina



## Introduction



Bios: Last version 



OPEN CORE 0.6.0 RELEASE efi for ASUS P8Z68 - DELUXE Hackintosh Catalina 10.15.6.



CPU: i7-2600 3.40Ghz (intel: Sundy Bride)

RAM: 12GB DDR3



GEFORCE GTX 770



![Preview](https://www.tonymacx86.com/data/attachments/282/282583-20d32b05bfa8b70f7f033e5570532cc0.jpg)



## Bios



* AI Tweaker > Ai Overclock Tuner > Auto

* AI Tweaker > Turbo Ratio > Auto

* AI Tweaker > Internal PLL Overvoltage > Auto

* AI Tweaker > Memory Frequency > Auto

* AI Tweaker > EPU Power Saving Mode > Disabled

* AI Tweaker > CPU Power Management > CPU Ratio > Auto

* AI Tweaker > CPU Power Management > Enhanced Intel Speedstep Technology > Enabled

* AI Tweaker > CPU Power Management > Turbo Mode > Enabled

* Advanced Settings > CPU Configuration > Active Processor Cores > All

* Advanced Settings > CPU Configuration > Limit CPUID Maximum > Disabled

* Advanced Settings > CPU Configuration > Execute Disable Bit > Enabled

* Advanced Settings > CPU Configuration > Enhanced Intel Speedstep Technology > Enabled

* Advanced Settings > CPU Configuration > Turbo Mode > Enabled

* Advanced Settings > CPU Configuration > CPU C1E > Auto

* Advanced Settings > CPU Configuration > CPU C3 Report > Auto

* Advanced Settings > CPU Configuration > CPU C6 Report > Auto

* Advanced Settings > CPU Configuration > Intel Virtualization Technology > Enabled

* Advanced Settings > PCH Configuration > High Precision Timer > Enabled

* Advanced Settings > SATA Configuration > SATA Mode Selection > AHCI

* Advanced Settings > SATA Configuration > S.M.A.R.T. Status Check > Enabled

* Advanced Settings > System Agent Configuration > Memory Remap Feature > Enabled

* Advanced Settings > System Agent Configuration > Graphics Configuration > Primary Display > Auto

* Advanced Settings > System Agent Configuration > Graphics Configuration > iGPU Memory > 64M

* Advanced Settings > System Agent Configuration > Graphics Configuration > Render Standby > Disabled

* Advanced Settings > System Agent Configuration > Graphics Configuration > iGPU Multi-monitor > Disabled

* Advanced Settings > CPU Configurations > VT-d > Disabled

* Advanced Settings > USB Configuration > Legacy Support > Auto

* Advanced Settings > USB Configuration > Legacy USB 3.0 Support > Enabled

* Advanced Settings > USB Configuration > EHCI Hand-off > Disabled

* Advanced Settings > Onboard Devices Configuration > HD Audio Controller > Enabled

* Advanced Settings > Onboard Devices Configuration > Front Panel Type > HD

* Advanced Settings > Onboard Devices Configuration > SPDIF Out Type > SPDIF

* Advanced Settings > Onboard Devices Configuration > Bluetooth Controller > Enabled

* Advanced Settings > Onboard Devices Configuration > VIA 1394 Controller > Enabled

* Advanced Settings > Onboard Devices Configuration > PCI Express X16_3 slot (black) bandwidth > Auto

* Advanced Settings > Onboard Devices Configuration > Marvell Storage Controller > AHCI Mode

* Advanced Settings > Onboard Devices Configuration > Marvell Storage OPROM > Disabled

* Advanced Settings > Onboard Devices Configuration > JMB Storage Controller > Enabled

* Advanced Settings > Onboard Devices Configuration > JMB Storage OPROM > Enabled

* Advanced Settings > Onboard Devices Configuration > Display OptionRom in POST > Enabled

* Advanced Settings > Onboard Devices Configuration > Asmedia USB 3.0 Controller > Enabled

* Advanced Settings > Onboard Devices Configuration > Asmedia USB 3.0 Battery Charging Support > Disabled

* Advanced Settings > Onboard Devices Configuration > Intel LAN Controller > Enabled

* Advanced Settings > Onboard Devices Configuration > Intel PXE OPROM > Disabled

* Advanced Settings > APM > Restore AC Power Loss > Power Off

* Advanced Settings > APM > Power On By PCI > Disabled

* Advanced Settings > APM > Power On By PCIE > Disabled

* Advanced Settings > APM > Power On By RTC > Disabled

* Monitor > CPU Q-Fan Control > Enabled

* Monitor > Chassis Q-Fan Control > Enabled



## What works



- Keyboard & Trackpad

- Audio ALC892 (can change 4 outputs)

- VGA + HDMI (Dual monitor)

- LAN x2 Internal RealtekRTL8111

- USB 2.0

- USB 3.0 (Inertnal on motherboard) + 2 blue on back 

- USB 3.1 +

- TurboBoost

- GPU Acceleration

- NVMe on AGP port (PCI-e)

- BCM4933 Native working wifi + bt (airdrop)



## What doesn't work



- Bluetooth on motherboard



## Post Install



- With Colover -> write EFI

- Copy files and decor it...

- I put new folder (After install) with other kexts, what I use

- Add SMBIOS, Serials and other stuff



## BIOS



- BIOS update for support NVMe on PCI-e



## After Update to 10.15.6



Probably you have kernel Panic and poker face :P



![Screenshot](images/IMG_3986.jpg)



In message look on line where saying Kernel Extensions in backtrace:

	probably you have com.apple.driver.AppleAHCIPort panic

	

	- reboot

	- Use usb for boot or if EFI working boot recovery partition.

	- Open terminal and go to you install disk

	

	- see your disk partitions

	- ~ df

	- go to kext folder

	- ~ /Volumes//Library/Extensions/

	- ls -l

	- look if you see something like panic message AppleAHCIPortHotplug.kext

	- you can moved it to other folder or delete

	- ~ rm AppleAHCIPortHotplug.kext

	- now you need restore permissions

	- ~ chmod -Rf 766 /Volumes//S*/L*/E*

	- ~ chmod -Rf 766 /Volumes//L*/E*

	- and now rebuild kext cache

	- ~ kextcache -i /Volumes/

	- ~ reboot

	

Thats it!

Finally boot normal, and use Hackintool



![Screenshot](images/catalina10156.png)