https://github.com/kukulich/home-assistant-jablotron100
Home Assistant custom component for JABLOTRON 100+ alarm system
https://github.com/kukulich/home-assistant-jablotron100
alarm custom-component hacs home-assistant integration jablotron
Last synced: 29 days ago
JSON representation
Home Assistant custom component for JABLOTRON 100+ alarm system
- Host: GitHub
- URL: https://github.com/kukulich/home-assistant-jablotron100
- Owner: kukulich
- License: mit
- Created: 2020-07-14T19:58:16.000Z (almost 5 years ago)
- Default Branch: master
- Last Pushed: 2025-01-10T14:05:08.000Z (4 months ago)
- Last Synced: 2025-03-30T00:06:23.919Z (about 1 month ago)
- Topics: alarm, custom-component, hacs, home-assistant, integration, jablotron
- Language: Python
- Homepage:
- Size: 600 KB
- Stars: 79
- Watchers: 15
- Forks: 27
- Open Issues: 7
-
Metadata Files:
- Readme: README.md
- Funding: .github/FUNDING.yml
- License: LICENSE.md
Awesome Lists containing this project
README
[](https://github.com/hacs/default)
# Jablotron 100+
Home Assistant custom component for JABLOTRON 100+ alarm system.
Tested with JA-100K, JA-101K, JA-101K-LAN, JA-103K, JA-103KRY, JA-106K-3G, JA-107K and JA-14K.
## Features
### Sections
- States are reported to Home Assistant.
- You can arm/disarm all sections. Supported states are `arm_away` (= armed) and `arm_night`/`arm_home` (choose in options what means "armed partially" for you).
- Event `jablotron100_wrong_code` is triggered when wrong code is inserted in Home Assistant.
- Problem in a section is reported in specific "problem" sensor.
### Devices
- Devices with two states (on/off, active/inactive, open/closed etc.) are supported.
- Sabotage or problem of the device is supported in specific "problem" sensor.
- Temperature is reported for thermostats, thermometers and smoke detectors.
- Pulses are reported for electricity meters with pulse output.
- Signal strength is reported for wireless devices.
- Battery level is reported for devices with battery.
### PG outputs
- States are reported to Home Assistant.
- It's possible to turn on/off all PG outputs.
### Central unit
- State of LAN connection is reported to Home Assistant for supported central units.
- Strength of GSM signal is reported for supported central units.
## Before installation
1. Connect the USB cable to Jablotron central unit
2. Restart the Home Assistant OS
## Installation
- If you use code with a prefix, insert the code with the asterisk, e.g. `12*3456`.
- Use code of administrator to make devices work. If you cannot use code of administrator, or you don't want to use devices, set the number of devices to 0.
- You have to set devices in the same order as you see them in your J-Link/F-Link/mobile application. Ignore the central unit on position 0.
- If you want to use PG outputs, the user of the code has to have rights to control the PG outputs. Set the number of PG outputs to 0 to ignore them.
Serial port should be automatically detected. If not, you can detect it manually and set it during integration installation.
```
$ dmesg | grep usb
$ dmesg | grep hid
```
The cable should be connected as `/dev/hidraw[x]`, `/dev/ttyUSB0` or similar.
### HACS
1. Install the integration via [HACS](https://hacs.xyz/) (Home Assistant Community Store)
*HACS is a third party community store and is not included in Home Assistant out of the box.*
2. Restart Home Assistant
3. Jablotron integration should be available in the integrations UI
### Manual
1. [Download integration](https://github.com/kukulich/home-assistant-jablotron100/releases/)
2. Copy the folder `custom_components/jablotron100` from the zip to your config directory
3. Restart Home Assistant
4. Jablotron integration should be available in the integrations UI
## Check
1. Try to arm/disarm all sections
2. Try to activate all devices if possible (open/close door/window, move ahead of motion sensor etc.) and check if Home Assistant see the state changes
3. Check log - it should be empty when everything works
4. Does any problem occur? Report [issue](https://github.com/kukulich/home-assistant-jablotron100/issues) or join [Discord](https://discord.gg/bNmaB6n)
Even if everything works for you, you can join the [Discord](https://discord.gg/bNmaB6n).
We would be happy:
- If you report model of you Jablotron central unit, so we know that integration works on another model
- If you can test some things (e.g. LAN), so we can make the integration more robust
The communication in Discord is mostly in Czech or Slovak but don't be afraid - you can use English as well.
## Debugging
1. Enable debug logging for the Jablotron intergation via the [logger](https://www.home-assistant.io/integrations/logger/) integration by adding the following lines to the `configuration.yaml` file.
```
logger:
default: info
logs:
custom_components.jablotron100: debug
```
2. Enable debug logging in the Jablotron integration. Go to the Integration page of your Home Assistant and click on the `Configure` button belonging to the Jablotron integration and then select `Debugging` to specify specific debugging options, such as `Log all incoming packets`. Finish the configuration by pressing the `Submit` button.
3. After enabling 1. and 2., the home assistant log should contain debug log of the Jablotron integration, e.g.,
```
2022-02-17 10:57:19 DEBUG (ThreadPoolExecutor-2_0) [custom_components.jablotron100] Incoming: 801a0cffffffff010001002820010027ffffffffffffffffffffffff
2022-02-17 10:57:19 DEBUG (ThreadPoolExecutor-2_0) [custom_components.jablotron100] Incoming: 5203820113
```
4. Restart Home Assistant
## Credits
Big thanks to [plaksnor](https://github.com/plaksnor/), [Horsi70](https://github.com/Horsi70/) and [Shamshala](https://github.com/Shamshala/) for their work on previous integration.