https://github.com/lampwins/stackstorm-napalm-logs

https://github.com/lampwins/stackstorm-napalm-logs

Last synced: 27 days ago
JSON representation

• Host: GitHub
• URL: https://github.com/lampwins/stackstorm-napalm-logs
• Owner: lampwins
• License: mit
• Created: 2017-10-02T20:13:19.000Z (over 7 years ago)
• Default Branch: master
• Last Pushed: 2017-10-02T21:32:23.000Z (over 7 years ago)
• Last Synced: 2024-12-05T18:47:25.824Z (about 1 month ago)
• Language: Python
• Size: 272 KB
• Stars: 0
• Watchers: 1
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md
  • Changelog: CHANGES.md
  • License: LICENSE

Awesome Lists containing this project

README

        
# stackstorm-napalm-logs

[napalm-logs](https://github.com/napalm-automation/napalm-logs) is an Open Source cross-vendor normalisation for network syslog messages, following the OpenConfig and IETF YANG models

maintained by napalm-automation.

## Configuration

Copy the example configuration in [napalm_logs.yaml.example](./napalm_logs.yaml.example)

to `/opt/stackstorm/configs/napalm_logs.yaml` and edit as required.

It should look like this:

```yaml

---

server_address: 1.1.1.1

server_port: 49017

auth_address: 1.1.1.1

auth_port: 49018

certificate_file: /opt/stackstorm/configs/napalm-logs.crt

```

Place your ssl certificate for the napalm-logs server in `/opt/stackstorm/configs/napalm-logs.crt` or another lcoation and update `certificate_file` in the config file.

After editing, run `sudo st2ctl reload --register-configs` to ensure your configuration

is loaded.

## Sensors

Napalm-logs registers a sensor, `napalm\_logs\_client` which runs a client that connects to the napalm-logs server. Any and all parsed logs receieved from the server will fire a `napalm_logs.log` trigger into st2 containing the payload of the log.