Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/lycheeverse/lychee
⚡ Fast, async, stream-based link checker written in Rust. Finds broken URLs and mail addresses inside Markdown, HTML, reStructuredText, websites and more!
https://github.com/lycheeverse/lychee
broken-links check link link-checker link-checkers link-checking validator
Last synced: 3 days ago
JSON representation
⚡ Fast, async, stream-based link checker written in Rust. Finds broken URLs and mail addresses inside Markdown, HTML, reStructuredText, websites and more!
- Host: GitHub
- URL: https://github.com/lycheeverse/lychee
- Owner: lycheeverse
- License: apache-2.0
- Created: 2020-08-04T22:31:45.000Z (over 4 years ago)
- Default Branch: master
- Last Pushed: 2024-11-28T08:51:25.000Z (14 days ago)
- Last Synced: 2024-12-01T03:35:25.668Z (11 days ago)
- Topics: broken-links, check, link, link-checker, link-checkers, link-checking, validator
- Language: Rust
- Homepage: https://lychee.cli.rs
- Size: 4.92 MB
- Stars: 2,224
- Watchers: 15
- Forks: 136
- Open Issues: 67
-
Metadata Files:
- Readme: README.md
- Contributing: CONTRIBUTING.md
- Funding: .github/FUNDING.yml
- License: LICENSE-APACHE
Awesome Lists containing this project
- links - lychee
- awesome-docs - lychee
- project-awesome - lycheeverse/lychee - ⚡ Fast, async, stream-based link checker written in Rust. Finds broken URLs and mail addresses inside Markdown, HTML, reStructuredText, websites and more! (Rust)
- awesome-documentation - Lychee - Finds broken URLs and mail addresses inside Markdown, HTML, reStructuredText, websites and more. (General Tools / Checker & Formatter)
- awesome - lycheeverse/lychee - ⚡ Fast, async, stream-based link checker written in Rust. Finds broken URLs and mail addresses inside Markdown, HTML, reStructuredText, websites and more! (Rust)
README
[](https://lycheeverse.github.io)
[](https://github.com/marketplace/actions/lychee-broken-link-checker)
[](https://docs.rs/lychee-lib)
[](https://github.com/lycheeverse/lychee/actions/workflows/links.yml)
[](https://hub.docker.com/r/lycheeverse/lychee)
⚡ A fast, async, stream-based link checker written in Rust.\
Finds broken hyperlinks and mail addresses inside Markdown, HTML,
reStructuredText, or any other text file or website!
Available as a command-line utility, a library and a [GitHub Action](https://github.com/lycheeverse/lychee-action).
## Table of Contents
- [Installation](#installation)
- [Features](#features)
- [Commandline usage](#commandline-usage)
- [Library usage](#library-usage)
- [GitHub Action Usage](#github-action-usage)
- [Pre-commit Usage](#pre-commit-usage)
- [Contributing to lychee](#contributing-to-lychee)
- [Troubleshooting and Workarounds](#troubleshooting-and-workarounds)
- [Users](#users)
- [Credits](#credits)
- [License](#license)
## Installation
### Arch Linux
```sh
pacman -S lychee
```
### OpenSUSE Tumbleweed
```sh
zypper in lychee
```
### macOS
Via [Homebrew](https://brew.sh):
```sh
brew install lychee
```
Via [MacPorts](https://www.macports.org):
```sh
sudo port install lychee
```
### Docker
```sh
docker pull lycheeverse/lychee
```
### NixOS
```sh
nix-env -iA nixos.lychee
```
### Nixpkgs
- [`lychee` package](https://search.nixos.org/packages?show=lychee&query=lychee) for configurations, Nix shells, etc.
- Let Nix check a packaged site with \
[`testers.lycheeLinkCheck`](https://nixos.org/manual/nixpkgs/stable/#tester-lycheeLinkCheck) `{ site = …; }`
### FreeBSD
```sh
pkg install lychee
```
### Scoop
```sh
scoop install lychee
```
### Termux
```sh
pkg install lychee
```
### Alpine Linux
```sh
# available for Alpine Edge in testing repositories
apk add lychee
```
### Chocolatey (Windows)
```sh
choco install lychee
```
### Pre-built binaries
We provide binaries for Linux, macOS, and Windows for every release. \
You can download them from the [releases page](https://github.com/lycheeverse/lychee/releases).
### Cargo
#### Build dependencies
On APT/dpkg-based Linux distros (e.g. Debian, Ubuntu, Linux Mint and Kali Linux)
the following commands will install all required build dependencies, including
the Rust toolchain and `cargo`:
```sh
curl -sSf 'https://sh.rustup.rs' | sh
apt install gcc pkg-config libc6-dev libssl-dev
```
#### Compile and install lychee
```sh
cargo install lychee
```
#### Feature flags
Lychee supports several feature flags:
- `native-tls` enables the platform-native TLS crate [native-tls](https://crates.io/crates/native-tls).
- `vendored-openssl` compiles and statically links a copy of OpenSSL. See the corresponding feature of the [openssl](https://crates.io/crates/openssl) crate.
- `rustls-tls` enables the alternative TLS crate [rustls](https://crates.io/crates/rustls).
- `email-check` enables checking email addresses using the [check-if-email-exists](https://crates.io/crates/check-if-email-exists) crate. This feature requires the `native-tls` feature.
- `check_example_domains` allows checking example domains such as `example.com`. This feature is useful for testing.
By default, `native-tls` and `email-check` are enabled.
## Features
This comparison is made on a best-effort basis. Please create a PR to fix
outdated information.
| | lychee | [awesome_bot] | [muffet] | [broken-link-checker] | [linkinator] | [linkchecker] | [markdown-link-check] | [fink] |
| -------------------- | ------- | ------------- | -------- | --------------------- | ------------ | -------------------- | --------------------- | ------ |
| Language | Rust | Ruby | Go | JS | TypeScript | Python | JS | PHP |
| Async/Parallel | ![yes] | ![yes] | ![yes] | ![yes] | ![yes] | ![yes] | ![yes] | ![yes] |
| JSON output | ![yes] | ![no] | ![yes] | ![yes] | ![yes] | ![maybe]1 | ![yes] | ![yes] |
| Static binary | ![yes] | ![no] | ![yes] | ![no] | ![no] | ️![no] | ![no] | ![no] |
| Markdown files | ![yes] | ![yes] | ![no] | ![no] | ![no] | ![yes] | ![yes] | ![no] |
| HTML files | ![yes] | ![no] | ![no] | ![yes] | ![yes] | ![no] | ![yes] | ![no] |
| Text files | ![yes] | ![no] | ![no] | ![no] | ![no] | ![no] | ![no] | ![no] |
| Website support | ![yes] | ![no] | ![yes] | ![yes] | ![yes] | ![yes] | ![no] | ![yes] |
| Chunked encodings | ![yes] | ![maybe] | ![maybe] | ![maybe] | ![maybe] | ![no] | ![yes] | ![yes] |
| GZIP compression | ![yes] | ![maybe] | ![maybe] | ![yes] | ![maybe] | ![yes] | ![maybe] | ![no] |
| Basic Auth | ![yes] | ![no] | ![no] | ![yes] | ![no] | ![yes] | ![no] | ![no] |
| Custom user agent | ![yes] | ![no] | ![no] | ![yes] | ![no] | ![yes] | ![no] | ![no] |
| Relative URLs | ![yes] | ![yes] | ![no] | ![yes] | ![yes] | ![yes] | ![yes] | ![yes] |
| Anchors/Fragments | ![yes] | ![no] | ![no] | ![no] | ![no] | ![yes] | ![yes] | ![no] |
| Skip relative URLs | ![yes] | ![no] | ![no] | ![maybe] | ![no] | ![no] | ![no] | ![no] |
| Include patterns | ![yes]️ | ![yes] | ![no] | ![yes] | ![no] | ![no] | ![no] | ![no] |
| Exclude patterns | ![yes] | ![no] | ![yes] | ![yes] | ![yes] | ![yes] | ![yes] | ![yes] |
| Handle redirects | ![yes] | ![yes] | ![yes] | ![yes] | ![yes] | ![yes] | ![yes] | ![yes] |
| Ignore insecure SSL | ![yes] | ![yes] | ![yes] | ![no] | ![no] | ![yes] | ![no] | ![yes] |
| File globbing | ![yes] | ![yes] | ![no] | ![no] | ![yes] | ![no] | ![yes] | ![no] |
| Limit scheme | ![yes] | ![no] | ![no] | ![yes] | ![no] | ![yes] | ![no] | ![no] |
| [Custom headers] | ![yes] | ![no] | ![yes] | ![no] | ![no] | ![no] | ![yes] | ![yes] |
| Summary | ![yes] | ![yes] | ![yes] | ![maybe] | ![yes] | ![yes] | ![no] | ![yes] |
| `HEAD` requests | ![yes] | ![yes] | ![no] | ![yes] | ![yes] | ![yes] | ![no] | ![no] |
| Colored output | ![yes] | ![maybe] | ![yes] | ![maybe] | ![yes] | ![yes] | ![no] | ![yes] |
| [Filter status code] | ![yes] | ![yes] | ![no] | ![no] | ![no] | ![no] | ![yes] | ![no] |
| Custom timeout | ![yes] | ![yes] | ![yes] | ![no] | ![yes] | ![yes] | ![no] | ![yes] |
| E-mail links | ![yes] | ![no] | ![no] | ![no] | ![no] | ![yes] | ![no] | ![no] |
| Progress bar | ![yes] | ![yes] | ![no] | ![no] | ![no] | ![yes] | ![yes] | ![yes] |
| Retry and backoff | ![yes] | ![no] | ![no] | ![no] | ![yes] | ![no] | ![yes] | ![no] |
| Skip private domains | ![yes] | ![no] | ![no] | ![no] | ![no] | ![no] | ![no] | ![no] |
| [Use as library] | ![yes] | ![yes] | ![no] | ![yes] | ![yes] | ![no] | ![yes] | ![no] |
| Quiet mode | ![yes] | ![no] | ![no] | ![no] | ![yes] | ![yes] | ![yes] | ![yes] |
| [Config file] | ![yes] | ![no] | ![no] | ![no] | ![yes] | ![yes] | ![yes] | ![no] |
| Cookies | ![yes] | ![no] | ![yes] | ![no] | ![no] | ![yes] | ![no] | ![yes] |
| Recursion | ![no] | ![no] | ![yes] | ![yes] | ![yes] | ![yes] | ![yes] | ![no] |
| Amazing lychee logo | ![yes] | ![no] | ![no] | ![no] | ![no] | ![no] | ![no] | ![no] |
[awesome_bot]: https://github.com/dkhamsing/awesome_bot
[muffet]: https://github.com/raviqqe/muffet
[broken-link-checker]: https://github.com/stevenvachon/broken-link-checker
[linkinator]: https://github.com/JustinBeckwith/linkinator
[linkchecker]: https://github.com/linkchecker/linkchecker
[markdown-link-check]: https://github.com/tcort/markdown-link-check
[fink]: https://github.com/dantleech/fink
[yes]: ./assets/yes.svg
[no]: ./assets/no.svg
[maybe]: ./assets/maybe.svg
[custom headers]: https://github.com/rust-lang/crates.io/issues/788
[filter status code]: https://github.com/tcort/markdown-link-check/issues/94
[skip private domains]: https://github.com/appscodelabs/liche/blob/a5102b0bf90203b467a4f3b4597d22cd83d94f99/url_checker.go
[use as library]: https://github.com/raviqqe/liche/issues/13
[config file]: https://github.com/lycheeverse/lychee/blob/master/lychee.example.toml
1 Other machine-readable formats like CSV are supported.
## Commandline usage
Recursively check all links in supported files inside the current directory
```sh
lychee .
```
You can also specify various types of inputs:
```sh
# check links in specific local file(s):
lychee README.md
lychee test.html info.txt
# check links on a website:
lychee https://endler.dev
# check links in directory but block network requests
lychee --offline path/to/directory
# check links in a remote file:
lychee https://raw.githubusercontent.com/lycheeverse/lychee/master/README.md
# check links in local files via shell glob:
lychee ~/projects/*/README.md
# check links in local files (lychee supports advanced globbing and ~ expansion):
lychee "~/projects/big_project/**/README.*"
# ignore case when globbing and check result for each link:
lychee --glob-ignore-case --verbose "~/projects/**/[r]eadme.*"
# check links from epub file (requires atool: https://www.nongnu.org/atool)
acat -F zip {file.epub} "*.xhtml" "*.html" | lychee -
```
lychee parses other file formats as plaintext and extracts links using [linkify](https://github.com/robinst/linkify).
This generally works well if there are no format or encoding specifics,
but in case you need dedicated support for a new file format, please consider creating an issue.
### Docker Usage
Here's how to mount a local directory into the container and check some input
with lychee.
- The `--init` parameter is passed so that lychee can be stopped from the terminal.
- We also pass `-it` to start an interactive terminal, which is required to show the progress bar.
- The `--rm` removes not used anymore container from the host after the run (self-cleanup).
- The `-w /input` points to `/input` as the default workspace
- The `-v $(pwd):/input` does local volume mounting to the container for lychee access.
> By default a Debian-based Docker image is used. If you want to run an Alpine-based image, use the `latest-alpine` tag.
> For example, `lycheeverse/lychee:latest-alpine`
#### Linux/macOS shell command
```sh
docker run --init -it --rm -w /input -v $(pwd):/input lycheeverse/lychee README.md
```
#### Windows PowerShell command
```powershell
docker run --init -it --rm -w /input -v ${PWD}:/input lycheeverse/lychee README.md
```
### GitHub Token
To avoid getting rate-limited while checking GitHub links, you can optionally
set an environment variable with your GitHub token like so `GITHUB_TOKEN=xxxx`,
or use the `--github-token` CLI option. It can also be set in the config file.
[Here is an example config file][config file].
The token can be generated on your [GitHub account settings page](https://github.com/settings/tokens).
A personal access token with no extra permissions is enough to be able to check public repo links.
For more scalable organization-wide scenarios you can consider a [GitHub App][github-app-overview].
It has a higher rate limit than personal access tokens but requires additional configuration steps on your GitHub workflow.
Please follow the [GitHub App Setup][github-app-setup] example.
[github-app-overview]: https://docs.github.com/en/apps/overview
[github-app-setup]: https://github.com/github/combine-prs/blob/main/docs/github-app-setup.md#github-app-setup
### Commandline Parameters
There is an extensive list of command line parameters to customize the behavior.
See below for a full list.
```text
A fast, async link checker
Finds broken URLs and mail addresses inside Markdown, HTML, `reStructuredText`, websites and more!
Usage: lychee [OPTIONS] ...
Arguments:
...
The inputs (where to get links to check from). These can be: files (e.g. `README.md`), file globs (e.g. `"~/git/*/README.md"`), remote URLs (e.g. `https://example.com/README.md`) or standard input (`-`). NOTE: Use `--` to separate inputs from options that allow multiple arguments
Options:
-c, --config
Configuration file to use
[default: lychee.toml]
-v, --verbose...
Set verbosity level; more output per occurrence (e.g. `-v` or `-vv`)
-q, --quiet...
Less output per occurrence (e.g. `-q` or `-qq`)
-n, --no-progress
Do not show progress bar.
This is recommended for non-interactive shells (e.g. for continuous integration)
--cache
Use request cache stored on disk at `.lycheecache`
--max-cache-age
Discard all cached requests older than this duration
[default: 1d]
--cache-exclude-status
A list of status codes that will be ignored from the cache
The following accept range syntax is supported: [start]..[=]end|code. Some valid
examples are:
- 429
- 500..=599
- 500..
Use "lychee --cache-exclude-status '429, 500..502' ..." to provide a comma- separated
list of excluded status codes. This example will not cache results with a status code of 429, 500,
501 and 502.
[default: ]
--dump
Don't perform any link checking. Instead, dump all the links extracted from inputs that would be checked
--dump-inputs
Don't perform any link extraction and checking. Instead, dump all input sources from which links would be collected
--archive
Specify the use of a specific web archive. Can be used in combination with `--suggest`
[possible values: wayback]
--suggest
Suggest link replacements for broken links, using a web archive. The web archive can be specified with `--archive`
-m, --max-redirects
Maximum number of allowed redirects
[default: 5]
--max-retries
Maximum number of retries per request
[default: 3]
--max-concurrency
Maximum number of concurrent network requests
[default: 128]
-T, --threads
Number of threads to utilize. Defaults to number of cores available to the system
-u, --user-agent
User agent
[default: lychee/x.y.z]
-i, --insecure
Proceed for server connections considered insecure (invalid TLS)
-s, --scheme
Only test links with the given schemes (e.g. https). Omit to check links with any other scheme. At the moment, we support http, https, file, and mailto
--offline
Only check local files and block network requests
--include
URLs to check (supports regex). Has preference over all excludes
--exclude
Exclude URLs and mail addresses from checking (supports regex)
--exclude-file
Deprecated; use `--exclude-path` instead
--exclude-path
Exclude file path from getting checked
-E, --exclude-all-private
Exclude all private IPs from checking.
Equivalent to `--exclude-private --exclude-link-local --exclude-loopback`
--exclude-private
Exclude private IP address ranges from checking
--exclude-link-local
Exclude link-local IP address range from checking
--exclude-loopback
Exclude loopback IP address range and localhost from checking
--exclude-mail
Exclude all mail addresses from checking (deprecated; excluded by default)
--include-mail
Also check email addresses
--remap
Remap URI matching pattern to different URI
--fallback-extensions
Test the specified file extensions for URIs when checking files locally.
Multiple extensions can be separated by commas. Extensions will be checked in
order of appearance.
Example: --fallback-extensions html,htm,php,asp,aspx,jsp,cgi
--header
Custom request header
-a, --accept
A List of accepted status codes for valid links
The following accept range syntax is supported: [start]..[=]end|code. Some valid
examples are:
- 200..=204
- 200..204
- ..=204
- ..204
- 200
Use "lychee --accept '200..=204, 429, 500' ..." to provide a comma-
separated list of accepted status codes. This example will accept 200, 201,
202, 203, 204, 429, and 500 as valid status codes.
[default: 100..=103,200..=299]
--include-fragments
Enable the checking of fragments in links
-t, --timeout
Website timeout in seconds from connect to response finished
[default: 20]
-r, --retry-wait-time
Minimum wait time in seconds between retries of failed requests
[default: 1]
-X, --method
Request method
[default: get]
-b, --base
Base URL or website root directory to check relative URLs e.g. or `/path/to/public`
--basic-auth
Basic authentication support. E.g. `http://example.com username:password`
--github-token
GitHub API token to use when checking github.com links, to avoid rate limiting
[env: GITHUB_TOKEN]
--skip-missing
Skip missing input files (default is to error if they don't exist)
--no-ignore
Do not skip files that would otherwise be ignored by '.gitignore', '.ignore', or the global ignore file
--hidden
Do not skip hidden directories and files
--include-verbatim
Find links in verbatim sections like `pre`- and `code` blocks
--glob-ignore-case
Ignore case when expanding filesystem path glob inputs
-o, --output
Output file of status report
--mode
Set the output display mode. Determines how results are presented in the terminal
[default: color]
[possible values: plain, color, emoji]
-f, --format
Output format of final status report
[default: compact]
[possible values: compact, detailed, json, markdown, raw]
--require-https
When HTTPS is available, treat HTTP links as errors
--cookie-jar
Tell lychee to read cookies from the given file. Cookies will be stored in the cookie jar and sent with requests. New cookies will be stored in the cookie jar and existing cookies will be updated
-h, --help
Print help (see a summary with '-h')
-V, --version
Print version
```
### Exit codes
- `0` for success (all links checked successfully or excluded/skipped as configured)
- `1` for missing inputs and any unexpected runtime failures or config errors
- `2` for link check failures (if any non-excluded link failed the check)
- `3` for errors in the config file
### Ignoring links
You can exclude links from getting checked by specifying regex patterns
with `--exclude` (e.g. `--exclude example\.(com|org)`).
Here are some examples:
```bash
# Exclude LinkedIn URLs (note that we match on the full URL, including the schema to avoid false-positives)
lychee --exclude '^https://www\.linkedin\.com'
# Exclude LinkedIn and Archive.org URLs
lychee --exclude '^https://www\.linkedin\.com' --exclude '^https://web\.archive\.org/web/'
# Exclude all links to PDF files
lychee --exclude '\.pdf$' .
# Exclude links to specific domains
lychee --exclude '(facebook|twitter|linkedin)\.com' .
# Exclude links with certain URL parameters
lychee --exclude '\?utm_source=' .
# Exclude all mailto links
lychee --exclude '^mailto:' .
```
For excluding files/directories from being scanned use `lychee.toml`
and `exclude_path`.
```toml
exclude_path = ["some/path", "*/dev/*"]
```
If a file named `.lycheeignore` exists in the current working directory, its
contents are excluded as well. The file allows you to list multiple regular
expressions for exclusion (one pattern per line).
For more advanced usage and detailed explanations, check out our comprehensive [guide on excluding links](https://lychee.cli.rs/recipes/excluding-links/).
### Caching
If the `--cache` flag is set, lychee will cache responses in a file called
`.lycheecache` in the current directory. If the file exists and the flag is set,
then the cache will be loaded on startup. This can greatly speed up future runs.
Note that by default lychee will not store any data on disk.
## Library usage
You can use lychee as a library for your own projects!
Here is a "hello world" example:
```rust
use lychee_lib::Result;
#[tokio::main]
async fn main() -> Result<()> {
let response = lychee_lib::check("https://github.com/lycheeverse/lychee").await?;
println!("{response}");
Ok(())
}
```
This is equivalent to the following snippet, in which we build our own client:
```rust
use lychee_lib::{ClientBuilder, Result, Status};
#[tokio::main]
async fn main() -> Result<()> {
let client = ClientBuilder::default().client()?;
let response = client.check("https://github.com/lycheeverse/lychee").await?;
assert!(response.status().is_success());
Ok(())
}
```
The client builder is very customizable:
```rust, ignore
let client = lychee_lib::ClientBuilder::builder()
.includes(includes)
.excludes(excludes)
.max_redirects(cfg.max_redirects)
.user_agent(cfg.user_agent)
.allow_insecure(cfg.insecure)
.custom_headers(headers)
.method(method)
.timeout(timeout)
.github_token(cfg.github_token)
.scheme(cfg.scheme)
.accepted(accepted)
.build()
.client()?;
```
All options that you set will be used for all link checks.
See the [builder
documentation](https://docs.rs/lychee-lib/latest/lychee_lib/struct.ClientBuilder.html)
for all options. For more information, check out the [examples](examples)
folder.
## GitHub Action Usage
A GitHub Action that uses lychee is available as a separate repository: [lycheeverse/lychee-action](https://github.com/lycheeverse/lychee-action)
which includes usage instructions.
## Pre-commit Usage
Lychee can also be used as a [pre-commit](https://pre-commit.com/) hook.
```yaml
# .pre-commit-config.yaml
repos:
- repo: https://github.com/lycheeverse/lychee.git
rev: v0.15.1
hooks:
- id: lychee
# Optionally include additional CLI arguments
args: ["--no-progress", "--exclude", "file://"]
```
Rather than running on staged-files only, Lychee can be run against an entire repository.
```yaml
- id: lychee
args: ["--no-progress", "."]
pass_filenames: false
```
## Contributing to lychee
We'd be thankful for any contribution. \
We try to keep the issue tracker up-to-date so you can quickly find a task to work on.
Try one of these links to get started:
- [good first issues](https://github.com/lycheeverse/lychee/issues?q=is%3Aissue+is%3Aopen+label%3A%22good+first+issue%22)
- [help wanted](https://github.com/lycheeverse/lychee/issues?q=is%3Aissue+is%3Aopen+label%3A%22help+wanted%22)
For more detailed instructions, head over to [`CONTRIBUTING.md`](/CONTRIBUTING.md).
## Troubleshooting and Workarounds
We collect a list of common workarounds for various websites in our [troubleshooting guide](./docs/TROUBLESHOOTING.md).
## Users
- https://github.com/InnerSourceCommons/InnerSourcePatterns
- https://github.com/opensearch-project/OpenSearch
- https://github.com/ramitsurana/awesome-kubernetes
- https://github.com/papers-we-love/papers-we-love
- https://github.com/pingcap/docs
- https://github.com/microsoft/WhatTheHack
- https://github.com/nix-community/awesome-nix
- https://github.com/balena-io/docs
- https://github.com/launchdarkly/LaunchDarkly-Docs
- https://github.com/pawroman/links
- https://github.com/analysis-tools-dev/static-analysis
- https://github.com/analysis-tools-dev/dynamic-analysis
- https://github.com/mre/idiomatic-rust
- https://github.com/bencherdev/bencher
- https://github.com/sindresorhus/execa
- https://github.com/tldr-pages/tldr-maintenance
- https://github.com/git-ecosystem/git-credential-manager
- https://github.com/git/git-scm.com
- https://github.com/OWASP/threat-dragon
- https://github.com/oxc-project/oxc
- https://github.com/hugsy/gef
- https://github.com/mermaid-js/mermaid
- https://github.com/hashicorp/consul
- https://github.com/Unleash/unleash
- https://github.com/fastify/fastify
- https://github.com/nuxt/nuxt
- https://github.com/containerd/containerd
- https://github.com/rolldown/rolldown
- https://github.com/rerun-io/rerun
- https://github.com/0xAX/asm
- https://github.com/mainmatter/100-exercises-to-learn-rust
- https://github.com/GoogleCloudPlatform/generative-ai
- https://github.com/DioxusLabs/dioxus
- https://github.com/ministryofjustice/modernisation-platform
- https://github.com/orhun/binsider
- https://github.com/NVIDIA/aistore
- https://github.com/gradle/gradle
- https://github.com/forus-labs/forui
- https://github.com/lycheeverse/lychee (yes, the lychee docs are checked with lychee 🤯)
If you are using lychee for your project, **please add it here**.
## Credits
The first prototype of lychee was built in [episode 10 of Hello
Rust](https://hello-rust.show/10/). Thanks to all GitHub and Patreon sponsors
for supporting the development since the beginning. Also, thanks to all the
great contributors who have since made this project more mature.
## License
lychee is licensed under either of
- Apache License, Version 2.0, (LICENSE-APACHE or
https://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or https://opensource.org/licenses/MIT)
at your option.
[🔼 Back to top](#back-to-top)