https://github.com/majjoha/picostudio

Four-track live looper for the Critter & Guitari Organelle.
https://github.com/majjoha/picostudio

looper organelle puredata

Last synced: 3 days ago
JSON representation

Four-track live looper for the Critter & Guitari Organelle.

• Host: GitHub
• URL: https://github.com/majjoha/picostudio
• Owner: majjoha
• License: isc
• Created: 2019-05-19T10:08:55.000Z (over 5 years ago)
• Default Branch: main
• Last Pushed: 2020-07-18T08:07:29.000Z (over 4 years ago)
• Last Synced: 2024-08-02T05:11:51.096Z (3 months ago)
• Topics: looper, organelle, puredata
• Language: Pure Data
• Homepage: https://patchstorage.com/picostudio/
• Size: 59.6 KB
• Stars: 16
• Watchers: 3
• Forks: 0
• Open Issues: 9
• Metadata Files:
  • Readme: README.md
  • License: LICENSE

Awesome Lists containing this project

README

        
# Picostudio

Picostudio is a four-track live looper inspired by the Teenage Engineering OP-1

and Tascam's Portastudio series.

Each track runs independently which means that the tracks are (intentionally)

not synced. Once recording stops, a track is played immediately. Every track is

recorded onto the device as a WAV file so it can be exported afterward.

![Picostudio](https://raw.githubusercontent.com/majjoha/picostudio/main/picostudio.png)

Download the patch on [Patchstorage](https://patchstorage.com/picostudio/).

## Requirements

- Critter and Guitari Organelle

## Controls

- Aux: start recording to the selected track.

- T1: select track 1.

- T2: select track 2.

- T3: select track 3.

- T4: select track 4.

- Knob 1: set the start position for the selected track.

- Knob 2: set the end position for the selected track.

- Knob 3: set the speed for the selected track.

- Knob 4: set the volume for the selected track.

- B: enable bounce mode which bounces track 1, track 2, and track 3 to track 4

  once recording starts.

- T: enable tape mode which adds a bit of wobble to the output.

- M: mute the input.

## LED

- Red means recording.

- Teal means bounce mode is enabled.

- Purple means tape mode is enabled.

The colors of the LED are listed in the order of importance, e.g., if both

bounce mode and tape mode are enabled, the LED will be teal. If you then record,

it changes red and returns to teal once the recording stops. If none of the

three modes are enabled, the LED will be unlit.

## License

See [LICENSE](./LICENSE).