https://github.com/matdombrock/planttool

An Arduino based device that uses 3 sensors to give you reading on just about everything you would need to know about the state of your house or garden plants.
https://github.com/matdombrock/planttool

Last synced: 7 days ago
JSON representation

An Arduino based device that uses 3 sensors to give you reading on just about everything you would need to know about the state of your house or garden plants.

• Host: GitHub
• URL: https://github.com/matdombrock/planttool
• Owner: matdombrock
• Created: 2021-04-25T12:44:04.000Z (over 3 years ago)
• Default Branch: master
• Last Pushed: 2021-04-25T12:47:00.000Z (over 3 years ago)
• Last Synced: 2024-11-07T04:44:34.297Z (about 2 months ago)
• Language: C++
• Size: 7.81 KB
• Stars: 0
• Watchers: 3
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md

Awesome Lists containing this project

README

        
# Arduino Plant Tool

An Arduino based device that uses 3 sensors to give you reading on just about everything you would need to know about the state of your house or garden plants. 

## Features

* Soil Moisture Level

* Light Level

* Temperature

* Humidity

* Heat Index ([What's That?](https://www.weather.gov/safety/heat-index))

## Components

* Arduino Nano (Or compatible board)

* I2C SSD1306 OLED Display Module (Display)

* DHT11 (Temperateure & Humidity Sensor)

* Photoresistor

* Capacitive Moisture Sensor (Any analog sensor should work)

* 2x 10k Ohm Resistor (one more if your moisture sensor is missing one)

* Push Button

* Jumper Cables, Breadboards ect.

## Setup (Assuming Arduino Nano)

* All devices are powered off 3.3v

* Arduino A4 -> OLED SDA

* Arduino A5 -> OLED SDL

* Arduino A3 <- Cap sensor analog out (Ground with 10k resistor if needed)

* Arduino A2 <- Photoresistor Out (Ground with 10k resistor)

* Arduino D2 <- Button Out (Ground with 10k resistor)

* Arduino D3 <- DHT Out

## Requires

In additon to the Arduino Core, this project requires:

* [Adafruit_SSD1306](https://github.com/adafruit/Adafruit_SSD1306)

* [DHT-sensor-library](https://github.com/adafruit/DHT-sensor-library)