https://github.com/merlin04/knobs-fw

firmware for 16 knob midi controller
https://github.com/merlin04/knobs-fw

Last synced: about 1 year ago
JSON representation

firmware for 16 knob midi controller

• Host: GitHub
• URL: https://github.com/merlin04/knobs-fw
• Owner: Merlin04
• License: mit
• Created: 2025-02-04T19:29:51.000Z (over 1 year ago)
• Default Branch: main
• Last Pushed: 2025-02-04T22:24:44.000Z (over 1 year ago)
• Last Synced: 2025-02-04T23:25:34.207Z (over 1 year ago)
• Language: Rust
• Size: 9.77 KB
• Stars: 0
• Watchers: 1
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md
  • License: LICENSE-MIT

Awesome Lists containing this project

README

          
# knobs

firmware for a midi controller with a 4x4 grid of potentiometers (running on a pro micro/atmega32u4 board)

## Build Instructions

1. Install prerequisites as described in the [`avr-hal` README] (`avr-gcc`, `avr-libc`, `avrdude`, [`ravedude`]).

2. Run `cargo build` to build the firmware.

3. Run `cargo run` to flash the firmware to a connected board.  If `ravedude`

   fails to detect your board, check its documentation at

   .

4. `ravedude` will open a console session after flashing where you can interact

   with the UART console of your board.

[`avr-hal` README]: https://github.com/Rahix/avr-hal#readme

[`ravedude`]: https://crates.io/crates/ravedude