Ecosyste.ms: Awesome

An open API service indexing awesome lists of open source software.

Awesome Lists | Featured Topics | Projects

https://github.com/mguentner/cannelloni

a SocketCAN over Ethernet tunnel
https://github.com/mguentner/cannelloni

can-bus socketcan

Last synced: 12 days ago
JSON representation

a SocketCAN over Ethernet tunnel

Awesome Lists containing this project

README 

        
# cannelloni

*a SocketCAN over Ethernet tunnel*



[![Chat on Matrix](https://matrix.to/img/matrix-badge.svg)](https://matrix.to/#/#cannelloni:matrix.org)



cannelloni is written in C++11 and uses UDP, TCP or SCTP to transfer CAN frames

between two machines.



Features:



- frame aggregation in Ethernet frames (multiple CAN frames in one

  Ethernet frame)

- IPv4/IPv6

- efficient protocol

- very high data rates possible (10 Mbit/s +)

- custom timeouts for certain IDs (see below)

- easy debugging

- CAN FD support on interfaces that support it

- UDP support (fast, unreliable transport)

- TCP support (reliable transport)

- SCTP support (optional, reliable transport)



# Important Usage Notice

cannelloni is **not suited** for production deployments. Use it only in environments where packet loss is tolerable.

There is **no guarantee** that CAN frames will reach their destination at all **and/or** in the right order.



# Ecosystem



- https://github.com/PhilippFux/ESP32_CAN_Interface

- https://github.com/tuvok/qtCannelloniCanBus

- https://github.com/mguentner/cannelloni_ports (currently only a lwIP implementation)

- https://github.com/epozzobon/lasagne (another esp32)

- https://github.com/GENIVI/CANdevStudio



## Compilation



cannelloni uses cmake to generate a Makefile.

You can build cannelloni using the following command.



```

cmake -DCMAKE_BUILD_TYPE=Release

make

```



If you do not want or need SCTP support, you can disable it

by setting `-DSCTP_SUPPORT=false`.

SCTP support is also disabled if you don't have `lksctp-tools`

installed.



## Installation



Just install it using



```

  make install

```



## Usage



### Example



Two machines 1 and 2 need to be connected:



![](doc/firstexp.png)



Machine 2 needs to be connected to the physical CAN Bus that is attached

to Machine 1.



Start cannelloni on Machine 1:



```

cannelloni -I slcan0 -R 192.168.0.3 -r 20000 -l 20000

```

cannelloni will now listen on port 20000 and has Machine 2 configured as

its remote.



Prepare vcan on Machine 2:



```

sudo modprobe vcan

sudo ip link add name vcan0 type vcan

sudo ip link set dev vcan0 up

```



When operating with `vcan` interfaces always keep in mind that they

easily surpass the possible data rate of any physical CAN interface.

An application that just sends whenever the bus is ready would simply

send with many Mbit/s.

The receiving end, a physical CAN interface with a net. data rate of

<= 1 Mbit/s would not be able to keep up.

It is therefore a good idea to rate limit a `vcan` interface to

prevent packet loss.



```

sudo tc qdisc add dev vcan0 root tbf rate 300kbit latency 100ms burst 1000

```

This command will rate limit `vcan0` to 300 kbit/s.

Try to match the rate limit with your physical interface on the remote.

Keep also in mind that this also increases the overall latency!



Now start cannelloni on Machine 2:

```

cannelloni -I vcan0 -R 192.168.0.2 -r 20000 -l 20000

```



The tunnel is now complete and can be used on both machines.

Simply try it by using `candump` and/or `cangen`.



If something does not work, try the debug switch `-d cut` to find out

what is wrong.



### Timeouts



*UDP + SCTP only!*



cannelloni either sends a full UDP frame or all CAN frames that

are queued when the timeout that has been specified by the `-t` option

has been reached.

The default value is 100000 us, so the worst case latency for any can

frame is



```

Lw ~= 100ms + Ethernet latency + Delay on Receiver

```



If you have high priority frames but you also want a small ethernet

overhead, you can create a csv in the format

```

CAN_ID,Timeout in us

```

to specify these frames. You can use the `#` character to comment your

frames.



For example, if the frames with the IDs 5 and 15 should be send after

a shorter timeout you can create a file with the following content.



```

# 15ms

5,15000

# 50ms

15,50000

```



You can load this file into each cannelloni instance with the `-T

file.csv` option.

Please note that the whole buffer will be flushed and not only the two

frames.



If you enable timer debugging using `-d t` you should see that the table

has been loaded successfully into cannelloni:



```

[...]

INFO:cannelloni.cpp[148]:main:Custom timeout table loaded:

INFO:cannelloni.cpp[149]:main:*---------------------*

INFO:cannelloni.cpp[150]:main:|  ID  | Timeout (us) |

INFO:cannelloni.cpp[153]:main:|     5|         15000|

INFO:cannelloni.cpp[153]:main:|    15|         50000|

INFO:cannelloni.cpp[154]:main:*---------------------*

INFO:cannelloni.cpp[155]:main:Other Frames:100000 us.

[...]

```



# Transports



## UDP



cannelloni supports UDP for stable connections where no packet loss

is expected. Here two instances communicate using defined ports.



Usage example



IP: 192.168.0.2

```

cannelloni -I vcan0 -R 192.168.0.3 -r 12000 -l 13000

```



IP: 192.168.0.3

```

cannelloni -I vcan0 -R 192.168.0.2 -r 13000 -l 12000

```



Set the *MTU* using `-m` depending on your connection. Default is

1500 bytes.



## SCTP



With SCTP it is possible to use cannelloni over lossy connections

where packet loss and re-ordering is very likely.

The SCTP implementation uses the server-client model (for now).

One instance binds on a fixed port and the other instance (client)

connects to it.



Usage example:



IP: 192.168.0.2 (Server)

```

cannelloni -I vcan0 -S s

```



IP: 192.168.0.3 (Client)

```

cannelloni -I vcan0 -S c -R 192.168.0.2

```



If there is no remote IP supplied to the server instance, every client

(any IP) will be accepted. Only one client can be connected at a time.

After the client disconnects, the server waits for a new client.



## TCP



Usage example:



IP: 192.168.0.2 (Server)

```

cannelloni -I vcan0 -C s

```



IP: 192.168.0.3 (Client)

```

cannelloni -I vcan0 -C c -R 192.168.0.2

```



With TCP, no frame buffer is used an frames are immediately transmitted,

frame sorting and timeouts do not apply here.



# Frame sorting



CAN frames can be sorted by their ID in each ethernet frame to write

high priority frames first on the receiving CAN bus.



This can be achieved by supplying the `-s` option.



# Filtering



cannelloni does not support filtering, if however you want to only bridge a

certain set of CAN IDs, you can first forward the frames of interest to virtual CAN

interface. From there you will send using cannelloni.



This can be achieved with `cangw` which is part of [can-utils](https://github.com/linux-can/can-utils/) and its respective

kernel module is also present in upstream Linux.



Let's look at an example where currently `can0` is sent to a remote machine:



```

cannelloni -I can0 -R 192.168.0.3 -r 12000

```



Let's say you want to only receive CAN frames with the ID `0x042` at the remote machine.

First, load two kernel modules, `can_gw` and `vcan`:



```

modprobe vcan

modprobe can_gw

```



Now, start a virtual CAN bus:



```

ip link add name vcan0 type vcan

ip link set dev vcan0 up mtu 16

```



Add a rule to the gateway that will forward frames with IDs that match `0x042 & 0xC00007F0`. Note that

the bitmask accounts for the type `can_id` which is 4 bytes long.



```

cangw -A -s can0 -d vcan0 -f 042:C00007FF -e

```



If you start candump now on `vcan0`, you should only see frames with ID `0x042`.

Now change the cannelloni command to



```

cannelloni -I vcan0 -R 192.168.0.3 -r 12000

```



Now you should see those `0x042` frames also at the remote machine.



If you want to also send frames from the remote to your original `can0`, you need

to add a rule for that as well!



# Paper



cannelloni was discussed in the paper *Mapping CAN-to-Ethernet communication channels within virtualized embedded environments* on

the Conference *Industrial Embedded Systems (SIES), 2015 10th IEEE International Symposium*.



DOI: [10.1109/SIES.2015.7185064](http://dx.doi.org/10.1109/SIES.2015.7185064)



The papers documentes a PoC how to virtualize CAN controllers similiar to the approach

Xen uses (netback/-front).



# Contributing



Please fork the repository, create a *separate* branch and create a PR

for your work.



# License



Copyright 2014-2023 Maximilian Güntner 



cannelloni is licensed under the GPL, version 2. See gpl-2.0.txt for

more information.