https://github.com/mjonuschat/voron-modular-config
Modular Voron Configuration Template
https://github.com/mjonuschat/voron-modular-config
Last synced: about 1 year ago
JSON representation
Modular Voron Configuration Template
- Host: GitHub
- URL: https://github.com/mjonuschat/voron-modular-config
- Owner: mjonuschat
- Created: 2023-01-28T04:19:47.000Z (over 3 years ago)
- Default Branch: main
- Last Pushed: 2024-03-07T03:58:40.000Z (over 2 years ago)
- Last Synced: 2025-02-27T03:54:14.794Z (over 1 year ago)
- Language: Python
- Size: 109 KB
- Stars: 10
- Watchers: 1
- Forks: 1
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
# Modular Voron Configuration Template
## Summary
This repository contains a modular configuration template for Voron 3D printers.
It's currently being used as a base for a Voron 2.4r2 (350mm³), a Trident
(300mm³) and a Tri-Zero Plus50 (165mm³).
## Usage
The repository root is at `~/printer_data` and everything else in this
repository is expecting this as the root. It's easiest to use on a fresh
install. From there check the [printer.cfg](config/printer.cfg) to enable (or
disable) features. Some options are configurable in
[variables.cfg](config/config/variables.cfg) and some parameters need to be
directly set in the respective hardware-specific configuration snippets.
### Requirements
This config expects to be run on a Klipper version >= 0.12 with adaptive bed
meshing support.
### Warning
This configuration is specific to my printers and the way I use them. **DO NOT**
run this config without at least having read and understood every file that is
being included, starting at `printer.cfg`.
## Acknowledgments
* AndrewEllis93 - [v2.247 config](https://github.com/AndrewEllis93/v2.247_backup_klipper_config)
* Alex Zellner - [V2.660 config](https://github.com/zellneralex/klipper_config)
* Félix Boisselier - [Generic Klipper Config](https://github.com/Frix-x/klipper-voron-V2)