https://github.com/mohas95/wipi-bridge-ui
Raspberry based Wi-Fi Bridge for routing clients to internet connection through a router, often used as a repeater, or bypass enterprise wpa security protocol.
https://github.com/mohas95/wipi-bridge-ui
node-red raspberry-pi repeater user-interface wifi wifi-bridge wifi-hotspot
Last synced: 9 months ago
JSON representation
Raspberry based Wi-Fi Bridge for routing clients to internet connection through a router, often used as a repeater, or bypass enterprise wpa security protocol.
- Host: GitHub
- URL: https://github.com/mohas95/wipi-bridge-ui
- Owner: mohas95
- Created: 2023-01-28T21:58:41.000Z (over 3 years ago)
- Default Branch: master
- Last Pushed: 2023-01-31T21:17:04.000Z (over 3 years ago)
- Last Synced: 2025-03-04T23:02:23.736Z (over 1 year ago)
- Topics: node-red, raspberry-pi, repeater, user-interface, wifi, wifi-bridge, wifi-hotspot
- Homepage:
- Size: 38.1 KB
- Stars: 1
- Watchers: 1
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
wipi-bridge-ui
==============
This is the corresponding node-red based user interface for the wipi-bridge
### About
WI-PI Bridge is a Raspberry PI(RPi) based Wi-Fi Bridge for routing clients to internet connection through a router, often used as a repeater, or bypass enterprise wpa security protocol.
### Installation
- The RPi OS image file can be downloaded [here](https://drive.google.com/file/d/1kfivoJRY1-tfTbqO5MyLWXaK64weQToH/view?usp=share_link).
- You can install the image file onto a microSD card using the [RPi Imager application](https://www.raspberrypi.com/software/).
- Once the image file has been copied to the microSD card, instert the card into the RPi, plug in the wifi-dongle into the USB port of the RPi, and then boot the device.
- Done, the WI-PI bridge should be working! Check your network wifi connections for the SSID [wipi_bridge]
### Connecting to the WI-PI bridge dashboard
#### Accessing through connected network connection
- On web browser go to: *wipi-bridge.local:1880/* (mdns) or *x.x.x.x:1880/* (x.x.x.x is the network IP of the WI-PI Brigdge assigned by the router)
#### Access without network connection(First time Connecting):
- Connect client to Access Point (default: wipi_bridge, psk: adamchuk)
- On web browser go to: *10.0.1.1:1880/*
- Configure settings