https://github.com/mrzack99s/netcoco

NetCoCo is a network automation application for manage network device and config network device without CLI Configuration
https://github.com/mrzack99s/netcoco

monitoring network networkautomation

Last synced: 4 months ago
JSON representation

NetCoCo is a network automation application for manage network device and config network device without CLI Configuration

• Host: GitHub
• URL: https://github.com/mrzack99s/netcoco
• Owner: mrzack99s
• License: apache-2.0
• Created: 2021-05-24T17:23:12.000Z (about 5 years ago)
• Default Branch: main
• Last Pushed: 2021-11-13T18:03:14.000Z (over 4 years ago)
• Last Synced: 2024-06-21T03:16:35.489Z (about 2 years ago)
• Topics: monitoring, network, networkautomation
• Language: Go
• Homepage: https://netcoco-io.gitbook.io/
• Size: 2.66 MB
• Stars: 1
• Watchers: 2
• Forks: 0
• Open Issues: 1
• Metadata Files:
  • Readme: README.md
  • License: LICENSE

Awesome Lists containing this project

README

          
# NetCoCo \| Network Automation Application

NetCoCo is a network automation application for manage network device and config network device without CLI Configuration. NetCoCo can generate network audits with your freeform topology through the use of a Topology Builder.

> For documentation and installation. Plase visit [netcoco-documentation](https://netcoco-io.gitbook.io/netcoco/)

## Features

* Topology Builder

* Network Monitor

* L2 Switch configure via GUI

  * Vlan Setting

  * Interface setting

## Support Devices

* Cisco IOS

* Cisco SG300

* Cisco SG350

## License

Copyright \(c\) 2020 - Chatdanai Phakaket

Licensed under the Apache License, Version 2.0 \(the "License"\); you may not use this file except in compliance with the License. You may obtain a copy of the License at

[http://www.apache.org/licenses/LICENSE-2.0](http://www.apache.org/licenses/LICENSE-2.0)