https://github.com/msojocs/nwjs-loongarch
一套适用于loongarch的nwjs交叉编译脚本
https://github.com/msojocs/nwjs-loongarch
loongarch loongarch64 nwjs
Last synced: 6 months ago
JSON representation
一套适用于loongarch的nwjs交叉编译脚本
- Host: GitHub
- URL: https://github.com/msojocs/nwjs-loongarch
- Owner: msojocs
- Created: 2023-12-11T10:13:38.000Z (almost 2 years ago)
- Default Branch: dev
- Last Pushed: 2024-05-11T06:51:26.000Z (over 1 year ago)
- Last Synced: 2025-02-09T15:38:15.179Z (8 months ago)
- Topics: loongarch, loongarch64, nwjs
- Language: C
- Homepage:
- Size: 710 KB
- Stars: 0
- Watchers: 2
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
# 环境要求
## 构建环境
操作系统：Windows 11
编译环境：WSL2 + [debian11](https://learn.microsoft.com/en-us/windows/wsl/install-manual#downloading-distributions)/[Ubuntu20.04](https://learn.microsoft.com/en-us/windows/wsl/install-manual#downloading-distributions)
### 构建额外信息
占用空间100G左右，建议磁盘拥有200G的空间。
# 构建脚本的使用
构建脚本编写依据：https://github.com/loongson/nw.js
目前仅支持nw80
1. 执行 `tools/install-deps.sh`, 安装必要的依赖
2. 执行 `tools/setup.sh`, 开始执行构建流程
# 模拟验证
使用loongarch硬件或者qemu，qemu请参考: [run-qemu](./docs/run-qemu.md)
# 构建记录
## CMake
https://github.com/Kitware/CMake/releases?page=9
## binutil-gdb
```shell
apt install -y libmpc-dev texinfo bison flex
```
## llvm-project
```shell
apt install -y ninja-build python3
```
## boto配置
```shell
export NO_AUTH_BOTO_CONFIG="/home/msojocs/.boto"
```
.boto内容
```
[Boto]
debug = 0
num_retries = 10
proxy = 127.0.0.1
proxy_port = 7890
```
## nwjs
```shell
./build/install-build-deps.sh
sudo apt install xz-utils python curl libcups2-dev libglib2.0-dev \
libnss3-dev \
libxkbcommon-dev \
libdrm-dev \
libgbm-dev \
libpango1.0-dev \
libdbus-1-dev \
gperf \
libx11-xcb-dev \
libkrb5-dev \
libpulse-dev \
libpci-dev \
libglx-dev
```
修改：`nwjs/src/build/config/linux/libffi/BUILD.gn` [link](./source-code/nwjs/src/build/config/linux/libffi/BUILD.gn):
```
config("libffi") {
#libs = [ ":libffi_pic.a" ] # 注释掉
libs = [ "ffi" ] # 新增一行
}
```
## ninja -C out/Release node
```shell
sudo apt-get install gcc-multilib g++-multilib
```
## ninja -C out/nw payload
如果构建失败，参考 [payload.patch](./tools/payload.patch) 修改；
就是把 `base::ListValue` 替换成 `base::Value::List`，把 `base::DictionaryValue` 替换成 `base::Value::Dict`；
然后，还有把对应方法替换一下。
# LoongArch
| 项目 | 值 |
|------|----|
| ABI | loongarch64-unknown-linux-gnu |
| ARCH | loong64 |
| libdir | lib64 |
| sysroot | debian_bullseye_loong64-sysroot |
## sysroot
```json
"bullseye_loong64": {
"Key": "20230611T210420Z-2",
"Sha1Sum": "1b857baabd7999ff0d6949a8973f896836ac45ac",
"SysrootDir": "debian_bullseye_loong64-sysroot",
"Tarball": "debian_bullseye_loong64_sysroot.tar.xz",
"URL": "https://commondatastorage.googleapis.com/chrome-linux-sysroot/toolchain"
}
```