https://github.com/muka/thermo-js
A DIY thermostat
https://github.com/muka/thermo-js
Last synced: about 2 months ago
JSON representation
A DIY thermostat
- Host: GitHub
- URL: https://github.com/muka/thermo-js
- Owner: muka
- License: mit
- Created: 2014-03-18T19:06:53.000Z (about 11 years ago)
- Default Branch: master
- Last Pushed: 2014-03-29T10:32:35.000Z (about 11 years ago)
- Last Synced: 2024-10-30T01:20:03.731Z (7 months ago)
- Language: JavaScript
- Size: 9 MB
- Stars: 2
- Watchers: 2
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
- License: LICENSE
Awesome Lists containing this project
README
thermo-js
===
An open-source DIY implementation of a thermostat, controllable from home and smartphone.
What you need
---
Based on a raw and optimistic count, you should spend around 120$ and some hours to set it up.
Hardware:
* Arduino (I've used 2009) http://store.arduino.cc/ with a caompatible usb cable (the printer one worked well for me)
* A pc or a rasperrypi (http://www.raspberrypi.org/) with a debian installed
* A Seed Studio Groove board and some components.
I've initially used this http://www.seeedstudio.com/depot/Grove-Starter-Kit-p-709.html but has been discontinued.. There is a "plus" one, but the serial LCD is missing.
Single components used:
* Base shield http://www.seeedstudio.com/depot/base-shield-v13-p-1378.html?cPath=132_134
* SerialLCD http://www.seeedstudio.com/depot/grove-serial-lcd-p-773.html?cPath=163_164
* Relay http://www.seeedstudio.com/depot/grove-relay-p-769.html?cPath=156_160
* Temperature sensor http://www.seeedstudio.com/depot/grove-temperature-sensor-p-774.html?cPath=144_147
* LED http://www.seeedstudio.com/depot/grove-led-p-767.html?cPath=156_157
* Rotary Angle Sensor http://www.seeedstudio.com/depot/grove-rotary-angle-sensor-p-p-1242.html?cPath=156_160
* Some connection cables http://www.seeedstudio.com/depot/Grove-Universal-4-Pin-20cm-Unbuckled-Cable-5-PCs-Pack-p-749.html
Software
* Arduino IDE http://arduino.cc/en/main/software
* nodejs http://nodejs.org/download/ or `sudo apt-get install nodejs && sudo npm install -g bower`
Setup
---
You can adapt the arduino input port, here follows a list of the pin used in the current code
Analog
* Temperature sensor - pin 1
* Rotary - pin 2
Digital
* Relay - pin 2
* LED - pin 6
* SerialLCD - pin 11
* Relay - pin 2
Installation
---
* Push the code to the arduino board with the IDE
* on linux (and possibly mac too) add your user name to dialout `sudo usermod -a -G dialout USERNAME`. Test with `cat /dev/ttyUSB0` (adapt the name to your tty, and set it accordingly in ./config/index.js)
* Setup the server code editing config/index.js and set your ip and port. Then
```
cd thermo-js
npm install
bower install
node app.js
```
License
---
MIT
I'm not responsible for the use of the code in ANY WAY. YOU'LL USE IT AT YOUR OWN RISK.