Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/myriadrf/LMS7002M-docs
Documentation for the Lime Microsystems second generation transceiver IC
https://github.com/myriadrf/LMS7002M-docs
Last synced: 14 days ago
JSON representation
Documentation for the Lime Microsystems second generation transceiver IC
- Host: GitHub
- URL: https://github.com/myriadrf/LMS7002M-docs
- Owner: myriadrf
- Created: 2015-02-05T16:39:39.000Z (almost 10 years ago)
- Default Branch: master
- Last Pushed: 2020-09-17T12:24:06.000Z (about 4 years ago)
- Last Synced: 2024-08-02T15:55:21.486Z (4 months ago)
- Size: 15.4 MB
- Stars: 93
- Watchers: 19
- Forks: 27
- Open Issues: 3
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
LMS7002M Documentation
======================The LMS7002M is Lime’s second-generation field programmable RF (FPRF) transceiver IC, with extended functionality to cover a greater range of frequencies and applications.
The device uses state of the art transceiver design in CMOS technology to significantly reduce cost and power consumption. It integrates a dual transceiver architecture to support 2×2 MIMO along with on-chip digital signal processing functions. The LMS7002M can run on any mobile communications and wireless standard – including all 2G, 3G and 4G variants and WiFi – both licensed and unlicensed.
Summary of features:
* Field Programmable Radio Frequency (FPRF) chip
* Dual transceiver ideal for MIMO
* User programmable on the fly
* Continuous coverage of the 100kHz-3.8GHz RF frequency range
* Digital interface to baseband with on chip integrated 12 bit D/A and A/D converters
* Programmable RF modulation bandwidth up to 120MHz using analog interface
* Programmable RF modulation bandwidth up to 56MHz using digital interface
* Supports both TDD and full duplex FDD
* LimeLight™ digital IQ interface – JEDEC JESD207 TDD and FDD compliant
* Transceiver Signal Processor block employs advanced techniques for enhanced performance
* Single chip supports 2×2 MIMO. Multiple chips can be used to implement higher order MIMO
* On-chip RF calibration circuitry
* Fully differential baseband signals, analog IQ
* Few external components
* Low voltage operation, 1.25, 1.4 and 1.8V. Integrated LDOs to run on a single 1.8V supply voltage
* On chip integrated microcontroller for simplified calibration, tuning and control
* Integrated clock PLL for flexible clock generation and distribution
* User definable analog and digital filters for customised filtering
* RF and base band Received Signal Strength Indicator (RSSI)
* 261pin aQFN 11.5×11.5 mm package
* Power down option
* Serial port interface
* Low power consumption, typical 880mW in full 2×2 MIMO mode (550mW in SISO mode) using external LDOs
* Multiple bypass modes for greater flexibilityFeedback and improvements
-------------------------We welcome contributions to the documentation in the form of reports of errors and omissions, and general suggestions for improvement, via the [issue tracker](https://github.com/myriadrf/LMS7002M-docs/issues) that is associated with this repository.
Contents
--------* [LMS7002M_Product_Brief.pdf][1] - LMS7002M Product Brief.
* [LMS7002M-DataSheet-2-2r0.pdf][2] (26th September 2014) - LMS7002M Data Sheet.
* [LMS7002M_Data_Sheet_v3.1r00.pdf][5] (11th May 2017) - LMS7002Mr3 Data Sheet.
* [LMS7002M-Quick-Starter-Manual-EVB7-2-2r0.pdf][3] (29th September 2014) - LMS7002M Evaluation Board Quick Start Manual.
* [LMS7002Mr2-SPIRegs-2-2r0.pdf][4] (26th September 2014) - LMS7002M SPI Register Map.
* [LMS7002M_Programming_and_Calibration_Guide_v31r05.pdf][6] (24th April 2017) - LMS7002Mr3 SPI Register Map.
* [LimeLight_modes_description_v01r01.pdf][7] - LMS7002Mr3 LimeLight modes description document.
* [LimeSDR-USB_channel_alignment_v01r00.pdf][8] - LMS7002Mr3 MIMO channel allignment document.
* [LMS7002M_Measurements-v1_05.pdf][9] - LMS7002M RF and AnalogMeasurement Results.[1]: https://github.com/myriadrf/LMS7002M-docs/raw/master/LMS7002M_Product_Brief.pdf
[2]: https://github.com/myriadrf/LMS7002M-docs/raw/master/LMS7002M-DataSheet-2-2r0.pdf
[3]: https://github.com/myriadrf/LMS7002M-docs/raw/master/LMS7002M-Quick-Starter-Manual-EVB7-2-2r0.pdf
[4]: https://github.com/myriadrf/LMS7002M-docs/raw/master/LMS7002Mr2-SPIRegs-2-2r0.pdf
[5]: https://github.com/myriadrf/LMS7002M-docs/raw/master/LMS7002M_Data_Sheet_v3.1r00.pdf
[6]: https://github.com/myriadrf/LMS7002M-docs/raw/master/LMS7002M_Programming_and_Calibration_Guide_v31r05.pdf
[7]: https://github.com/myriadrf/LMS7002M-docs/raw/master/LimeLight_modes_description_v01r01.pdf
[8]: https://github.com/myriadrf/LMS7002M-docs/raw/master/LimeSDR-USB_channel_alignment_v01r00.pdf
[9]: https://github.com/myriadrf/LMS7002M-docs/raw/master/LMS7002M_Measurements-v1_05.pdfSupport
-------Support is available via the [forums](https://discourse.myriadrf.org) and [Google group](https://groups.google.com/forum/#!forum/limemicro-opensource).