Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/mzyy94/ns-remote
Play Nintendo Switch anyware
https://github.com/mzyy94/ns-remote
Last synced: 2 months ago
JSON representation
Play Nintendo Switch anyware
- Host: GitHub
- URL: https://github.com/mzyy94/ns-remote
- Owner: mzyy94
- License: gpl-3.0
- Created: 2020-05-02T17:08:33.000Z (almost 5 years ago)
- Default Branch: master
- Last Pushed: 2021-01-10T12:13:34.000Z (about 4 years ago)
- Last Synced: 2024-11-07T13:37:53.776Z (3 months ago)
- Language: JavaScript
- Homepage: https://mzyy94.com/blog/2020/05/11/play-nintendo-switch-on-smartphone/
- Size: 771 KB
- Stars: 118
- Watchers: 8
- Forks: 10
- Open Issues: 1
-
Metadata Files:
- Readme: README.md
- License: LICENSE
Awesome Lists containing this project
- awesome-pion - mzyy94/ns-remote - Play Nintendo Switch anyware (Media API)
README
# ns-remote
Play Nintendo Switch anyware
## Requirements
- Nintendo Switch
- Nintendo Switch Dock
- HDMI Cable
- Raspberry Pi 4 Model B
- [H2C-RPI-B01] or [B101]
- USB 3.0 A to C Cable [^1]
- Powered USB 3.0 Hub [^1]
[H2C-RPI-B01]: https://mzyy94.com/blog/2020/04/10/raspberrypi-hdmi-input/#h2c-rpi-b01
[B101]: https://auvidea.eu/b101-hdmi-to-csi-2-bridge-15-pin-fpc/
[^1]: https://mzyy94.com/blog/2020/04/17/nintendo-switch-audio-uac-gadget/#%E6%98%A0%E5%83%8F%E3%81%A8%E9%9F%B3%E5%A3%B0%E3%82%92webrtc
## Pi Setup
### config.txt
Put these line into /boot/config.txt on Raspbian.
```
dtoverlay=dwc2
dtoverlay=tc358743
```
### /etc/modules
Put these line into /etc/modules on Raspbian.
```
dwc2
libcomposite
```
### H2C-RPI-B01 Board
Connect H2C-RPI-B01 board to Raspberry Pi and run the following command (every time before launch).
```
v4l2-ctl --set-edid=file=720P30EDID.txt
v4l2-ctl --set-dv-bt-timings query
```
See [スマホでNintendo Switchのゲームをする - 犬アイコンのみっきー](https://mzyy94.com/blog/2020/05/11/play-nintendo-switch-on-smartphone/#hdmi%E5%85%A5%E5%8A%9B%E3%82%92%E6%89%B1%E3%81%86) for more details.
### Add Pro Controller USB Gadget with UAC Audio
Run [procon_audio.sh](https://gist.github.com/mzyy94/02bcd9d843c77896803c4cd0c4d9b640#file-procon_audio-sh) with `sudo` (every time after reboot).
For more details, see links below
- [UAC GadgetでNintendo Switchの音声出力をRaspberry Piに取り込む - 犬アイコンのみっきー](https://mzyy94.com/blog/2020/04/17/nintendo-switch-audio-uac-gadget/#pro-controller--uac)
- [スマホでNintendo Switchを操作する 〜 USB GadgetでPro Controllerをシミュレート 〜 - 犬アイコンのみっきー](https://mzyy94.com/blog/2020/03/20/nintendo-switch-pro-controller-usb-gadget/#usb-gadget%E3%81%A7hid%E3%82%B7%E3%83%9F%E3%83%A5%E3%83%AC%E3%83%BC%E3%83%88%E5%AE%9F%E9%A8%93)
## Build
```sh
go build
```
## Launch
```
sudo ./ns-remote
```
Open http://raspberrypi.local:8000 on your smart phone.
### Launch with specific device
Find your audio/video capture device with `v4l2-ctl --list-devices` and `arecord -l`. And specify the devices to an argument.
For example,
```
sudo ./ns-remote -audio hw:1,0 -video /dev/video1
```
## Limitations
- Wake-up is not supported yet
- Must set up Powered-On Nintendo Switch in the Dock.
## License
[GPL v3](LICENSE)