https://github.com/nature40/sensorboxes-images
Configuration, scripts and ressources for Sensorboxes Images
https://github.com/nature40/sensorboxes-images
images pimod raspberry-pi sensorbox
Last synced: 3 months ago
JSON representation
Configuration, scripts and ressources for Sensorboxes Images
- Host: GitHub
- URL: https://github.com/nature40/sensorboxes-images
- Owner: Nature40
- Created: 2019-01-25T13:46:44.000Z (over 6 years ago)
- Default Branch: master
- Last Pushed: 2021-01-28T10:25:12.000Z (over 4 years ago)
- Last Synced: 2025-01-09T11:59:33.309Z (5 months ago)
- Topics: images, pimod, raspberry-pi, sensorbox
- Language: Python
- Homepage:
- Size: 41 MB
- Stars: 1
- Watchers: 9
- Forks: 0
- Open Issues: 7
-
Metadata Files:
- Readme: Readme.md
Awesome Lists containing this project
README
# Natur 4.0: Sensorboxes
[](https://travis-ci.org/Nature40/Sensorboxes-Images)
This repo collects software and hardware descriptions and links used in Natur 4.0 Sensorboxes. It contains distribution definitions (using pimod) and configuration files for sensorboxes.
## Overview
An installation currently consist of those parts:
- [LiftSystem](https://github.com/Nature40/Satellite-LiftSystem): stateless ESP32 Board and Motor Driver to run the Lift
- LiftBox: various Sensors, running up and down
- PlanetBox: various sensors, Harddrive as data sink, LTE uplink
## Configuration
To setup an installation one has to install the prepared images to the devices and configure them. The configuration mainly consists of adapting the static config (`/boot/sensorproxy.yml`) as well as the measurement cycle (`/boot/meterings.yml`).
More details can be found in [pysensorproxy Readme](https://github.com/nature40/pysensorproxy).
## Network Auto Configuration
The IP addresses are autoconfigured using a set of scripts ([Wi-Fi](https://github.com/Nature40/Sensorboxes-Images/blob/master/Mesh/etc/network/interfaces.d/adhoc.sh), [Wireguard](https://github.com/Nature40/Sensorboxes-Images/blob/097da475bb3748acea959cec190717a0ae4b5ee1/Base/etc/wireguard/nature40.conf.sh)) run at bootup. The prefixes are assigned statically, while the dynamic part is computed using the Rasperry Pi Serial number.
- Ad-hoc Wi-Fi Network: 169.254.X.X
- B.A.T.M.A.N Mesh: 10.254.X.X
- Wireguard: 172.16.X.X
An IP adress list used for Nature 4.0 [can be found here (private)](https://github.com/Nature40/Sensorboxes-Config/blob/master/hosts).
## Useful commands
##### pysensorproxy daemon control
```bash
# control daemon
sudo systemctl start sensorproxy
sudo systemctl stop sensorproxy
systemctl status sensorproxy
# view logs
journalctl -u sensorproxy
# follow current log
journalctl -fu sensorproxy
# run standalone instance
sudo sensorproxy -vv --config /boot/sensorproxy.yml --metering /boot/meterings.yml
```
## Build Distro
A distribution can be build by using pimod. This tutorial will use the provided `docker-compose` file.
```bash
# first update / init the submodules
git submodule update --init --recursive
# download the required raspbian image
wget http://downloads.raspberrypi.org/raspbian_lite/images/raspbian_lite-2019-07-12/2019-07-10-raspbian-buster-lite.zip
unzip 2019-07-10-raspbian-buster-lite.zip
# build the Base, Mesh and Sensorbox image
docker-compose run pimod pimod.sh Base.Pifile
docker-compose run pimod pimod.sh Mesh.Pifile
docker-compose run pimod pimod.sh Sensorbox.Pifile
```
```bash
$ docker-compose run pimod pimod.sh Sensorbox.Pifile
### FROM 2018-11-13-raspbian-stretch-lite.img
### TO LiftCar.img
### PUMP 100
100+0 records in
100+0 records out
104857600 bytes (105 MB, 100 MiB) copied, 0.929542 s, 113 MB/s
e2fsck 1.43.4 (31-Jan-2017)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
rootfs: 39646/110880 files (0.1% non-contiguous), 258346/443392 blocks
resize2fs 1.43.4 (31-Jan-2017)
The filesystem is already 443392 (4k) blocks long. Nothing to do!
Disk /dev/loop0: 1.9 GiB, 1971322880 bytes, 3850240 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x7ee80803
Device Boot Start End Sectors Size Id Type
/dev/loop0p1 8192 98045 89854 43.9M c W95 FAT32 (LBA)
/dev/loop0p2 98304 3645439 3547136 1.7G 83 Linux
loop deleted : /dev/loop0
### RUN raspi-config nonint do_serial 0
...
```