https://github.com/nemasisdarkx/esp_controller

ESP Now Protocol based controller
https://github.com/nemasisdarkx/esp_controller

controller esp32 espnow rc

Last synced: over 1 year ago
JSON representation

ESP Now Protocol based controller

• Host: GitHub
• URL: https://github.com/nemasisdarkx/esp_controller
• Owner: NemasisDarkX
• License: mit
• Created: 2025-03-26T09:13:37.000Z (over 1 year ago)
• Default Branch: main
• Last Pushed: 2025-03-26T12:27:48.000Z (over 1 year ago)
• Last Synced: 2025-03-26T13:30:57.192Z (over 1 year ago)
• Topics: controller, esp32, espnow, rc
• Language: C++
• Homepage:
• Size: 265 KB
• Stars: 0
• Watchers: 1
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md
  • License: LICENSE

Awesome Lists containing this project

README

          
# ESP_CONTROLLER

ESP_CONTROLLER is a project designed to facilitate wireless communication between a master controller and multiple receiver modules using ESP8266 or ESP32 devices. This setup allows for seamless control and monitoring of various devices over a Wi-Fi network.

## Project Structure

The repository is organized into the following directories:

- **Master_Controller/**: Contains the firmware code for the master ESP device, responsible for sending commands to the receivers.

- **Receiver/**: Contains the firmware code for the receiver ESP devices, which execute commands received from the master controller.

## Getting Started

To set up and run the ESP_CONTROLLER project, follow these steps:

1. **Software Requirements**:

   - Arduino IDE for firmware development.

   - ESP32 board support installed in the development environment.

2. **Setup Instructions**:

   - **Master Controller**:

     - Navigate to the `Master_Controller` directory.

     - Open the firmware code in your development environment.

     - Configure the wifi channel(line 6).

     - Upload the firmware to the master ESP device.

   - **Receiver Modules**:

     - Navigate to the `Receiver` directory.

     - Open the firmware code in your development environment.

     - Configure the same wifi channel as `Master_Controller`(line 7).

     - Upload the firmware to each receiver ESP device.

## Images

Example circuit connection:

- **Controller Diagram**: `Controller.png`

- **Receiver Diagram**: `receiver1.png`

## License

This project is licensed under the [MIT License](LICENSE).