Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/nopnop2002/esp-idf-mcp3002
Driver for A/D converter with SPI serial interface
https://github.com/nopnop2002/esp-idf-mcp3002
esp-idf esp32 mcp3001 mcp3002 mcp3004 mcp3008 mcp3201 mcp3202 mcp3204 mcp3208 mcp3301 mcp3302 mcp3304
Last synced: about 2 months ago
JSON representation
Driver for A/D converter with SPI serial interface
- Host: GitHub
- URL: https://github.com/nopnop2002/esp-idf-mcp3002
- Owner: nopnop2002
- License: mit
- Created: 2022-03-11T23:04:55.000Z (almost 3 years ago)
- Default Branch: main
- Last Pushed: 2024-10-15T20:16:30.000Z (2 months ago)
- Last Synced: 2024-10-17T06:46:01.538Z (2 months ago)
- Topics: esp-idf, esp32, mcp3001, mcp3002, mcp3004, mcp3008, mcp3201, mcp3202, mcp3204, mcp3208, mcp3301, mcp3302, mcp3304
- Language: C
- Homepage:
- Size: 24.4 KB
- Stars: 7
- Watchers: 2
- Forks: 4
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
- License: LICENSE
Awesome Lists containing this project
README
# esp-idf-mcp3002
Driver for A/D converter with SPI serial interface.
esp-idf includes an ADC driver, but the convertible voltage is up to 3.3V.
By giving Vdd and Vref appropriately and level-shifting MOSI,MISO,CS and SCK, Higher voltages can be converted.
For example, when converting 5V, High Level Input Voltage of MOSI and SCK must be 0.7*5V=3.5V or higher.
And the high level output voltage of MISO will be 4.1V or higher.
# Supported converters
|Model|Number of channels|Resolution|MinValue|MaxValue|Operating voltage|
|:-:|:-:|:-:|:-:|:-:|:-:|
|MCP3001|1|10Bits|0|1023|2.7V - 5.5V|
|MCP3002|2|10Bits|0|1023|2.7V - 5.5V|
|MCP3004|4|10Bits|0|1023|2.7V - 5.5V|
|MCP3008|8|10Bits|0|1023|2.7V - 5.5V|
|MCP3201|1|12Bits|0|4095|2.7V - 5.5V|
|MCP3202|2|12Bits|0|4095|2.7V - 5.5V|
|MCP3204|4|12Bits|0|4095|2.7V - 5.5V|
|MCP3208|8|12Bits|0|4095|2.7V - 5.5V|
|MCP3301|1|12Bits+Sign|-4095|4095|4.5V - 5.5V|
|MCP3302|4|12Bits+Sign|-4095|4095|4.5V - 5.5V|
|MCP3304|8|12Bits+Sign|-4095|4095|4.5V - 5.5V|
# Software requirements
ESP-IDF V4.4/V5.x.
ESP-IDF V5.0 is required when using ESP32-C2.
ESP-IDF V5.1 is required when using ESP32-C6.
# Installation
```Shell
git clone https://github.com/nopnop2002/esp-idf-mcp3002
cd esp-idf-mcp3002/
idf.py set-target {esp32/esp32s2/esp32s3/esp32c2/esp32c3/esp32c6}
idf.py menuconfig
idf.py flash
```
__Note for ESP32C3__
For some reason, there are development boards that cannot use GPIO06, GPIO08, GPIO09, GPIO19 for SPI clock pins.
According to the ESP32C3 specifications, these pins can also be used as SPI clocks.
I used a raw ESP-C3-13 to verify that these pins could be used as SPI clocks.
# Configuration
## Device Setting
## SPI Setting
## SPI BUS selection
The ESP32 series has three SPI BUSs.
SPI1_HOST is used for communication with Flash memory.
You can use SPI2_HOST and SPI3_HOST freely.
When you use SDSPI(SD Card via SPI), SDSPI uses SPI2_HOST BUS.
When using this module at the same time as SDSPI or other SPI device using SPI2_HOST, it needs to be changed to SPI3_HOST.
When you don't use SDSPI, both SPI2_HOST and SPI3_HOST will work.
Previously it was called HSPI_HOST / VSPI_HOST, but now it is called SPI2_HOST / SPI3_HOST.
# Wirering
|MCP3xxx||ESP32|ESP32-S2/S3|ESP32-C2/C3||
|:-:|:-:|:-:|:-:|:-:|:-:|
|MISO|--|GPIO19|GPIO37|GPIO4||
|SCK|--|GPIO18|GPIO36|GPIO3||
|MOSI|--|GPIO23|GPIO35|GPIO2|*1|
|CS|--|GPIO5|GPIO34|GPIO1||
|Vdd|--|3.3V|3.3V|3.3V||
|Vss|--|GND|GND|GND||
In addition to this, Vref and Agnd connections are required.
See the data sheet for details.
(*1)Not required for MCP3001/3201/3301.
# Screen Shot
