https://github.com/nugrohoesbb/pengaduk-nutrisi
Project sistem pengaduk nutrisi Sulawesi
https://github.com/nugrohoesbb/pengaduk-nutrisi
arduino
Last synced: 2 months ago
JSON representation
Project sistem pengaduk nutrisi Sulawesi
- Host: GitHub
- URL: https://github.com/nugrohoesbb/pengaduk-nutrisi
- Owner: NugrohoESBB
- Created: 2023-04-07T08:50:55.000Z (about 2 years ago)
- Default Branch: main
- Last Pushed: 2023-05-31T16:06:12.000Z (almost 2 years ago)
- Last Synced: 2024-12-27T12:11:28.482Z (4 months ago)
- Topics: arduino
- Language: C++
- Homepage:
- Size: 2.54 MB
- Stars: 0
- Watchers: 1
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
# Pengaduk-Nutrisi
Run Website -> not available
# Schematic
# Documentation
## LCD 20x4 with I2C Pin Use to Arduino Uno
| PIN LCD | Type | Pin Mega|
| :-------- | :------- | :------- |
| `SDA` | `Communication Serial` |`SDA` |
| `SCL` | `Communication Serial` |`SCL`|
| `GND` | `Ground` |`GND`|
| `5V` | `VCC` | `5V`|
## Keypad 4x4 with I2C Pin Use to Arduino Uno
| PIN LCD | Type | Pin Mega|
| :-------- | :------- | :------- |
| `SDA` | `Communication Serial` |`SDA` |
| `SCL` | `Communication Serial` |`SCL`|
| `GND` | `Ground` |`GND`|
| `5V` | `VCC` | `5V`|
## Rumus Water Flow Sensor
```c++
// Variable flow sensors
volatile long pulseFlow1;
volatile long pulseFlow2;
unsigned long lastTimeFlow1;
unsigned long lastTimeFlow2;
float volumeFlow1;
float volumeFlow2;
void setup() {
// Flow sensor initialization
attachInterrupt(digitalPinToInterrupt(flow1SensorPin), increase1, RISING);
attachInterrupt(digitalPinToInterrupt(flow2SensorPin), increase2, RISING);
}
void loop() {
volFlow1();
volFlow2();
}
void volFlow1() {
volumeFlow1 = 2663 * pulseFlow1;
if (millis() - lastTimeFlow1 > 1000) {
pulseFlow1 = 0;
lastTimeFlow1 = millis();
}
lcd1.setCursor(0, 1);
lcd1.print("Flow 1: ");
lcd1.print(volumeFlow1);
lcd1.setCursor(16, 1);
lcd1.print("mL/s");
}
void volFlow2() {
volumeFlow2 = 2663 * pulseFlow2;
if (millis() - lastTimeFlow2 > 1000) {
pulseFlow2 = 0;
lastTimeFlow2 = millis();
}
lcd1.setCursor(0, 2);
lcd1.print("Flow 2: ");
lcd1.print(volumeFlow2);
lcd1.setCursor(16, 2);
lcd1.print("mL/s");
}
void increase1() {
pulseFlow1++;
}
void increase2() {
pulseFlow2++;
}
```