https://github.com/nw-rs/bootloader

Rust bootloader for the n0110 calculator.
https://github.com/nw-rs/bootloader

bootloader calculator dfu embedded numworks rust

Last synced: 9 days ago
JSON representation

Rust bootloader for the n0110 calculator.

• Host: GitHub
• URL: https://github.com/nw-rs/bootloader
• Owner: nw-rs
• License: mit
• Created: 2022-06-27T18:53:58.000Z (over 2 years ago)
• Default Branch: master
• Last Pushed: 2023-06-07T08:03:40.000Z (over 1 year ago)
• Last Synced: 2024-08-09T22:35:10.009Z (3 months ago)
• Topics: bootloader, calculator, dfu, embedded, numworks, rust
• Language: Rust
• Size: 36.1 KB
• Stars: 7
• Watchers: 1
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md
  • License: LICENSE

Awesome Lists containing this project

README

        
# NW Bootloader

A bootloader for the Numworks n0110 calculator written in Rust.

## Setup

To setup the developement environment follow the instructions in

[`rustworks/SETUP.md`](https://github.com/nw-rs/)

## STLink

If you have an STLink debugger (I am using the STLink V3SET) you can flash

using one of the following commands:

### Flash

Specify the chip manually:

```zsh

cargo flash --chip=stm32f730V8Tx

```

Let `cargo-make` specify the chip for you:

```zsh

cargo make flash

```

### Debug

Using `cargo-embed` (recommended):

```zsh

cargo embed

```

Using `probe-rs`:

```zsh

cargo run

```

## DFU flash

Complete setup, plug in your calculator and put it into DFU mode (press 6 and

the reset button on the back at the same time), then run the following command:

```zsh

cargo make dfu

```