Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/panyingyun/argonone
Argon One Service and Control Service coding by golang for Raspberry Pi 4B/4B+ CentOS7.7 OS
https://github.com/panyingyun/argonone
argon argonone golang
Last synced: about 2 months ago
JSON representation
Argon One Service and Control Service coding by golang for Raspberry Pi 4B/4B+ CentOS7.7 OS
- Host: GitHub
- URL: https://github.com/panyingyun/argonone
- Owner: panyingyun
- License: gpl-3.0
- Created: 2020-06-07T00:56:39.000Z (over 4 years ago)
- Default Branch: master
- Last Pushed: 2022-10-17T01:21:17.000Z (about 2 years ago)
- Last Synced: 2024-08-03T06:01:41.129Z (5 months ago)
- Topics: argon, argonone, golang
- Language: Go
- Homepage: https://www.michaelapp.com/
- Size: 1.87 MB
- Stars: 6
- Watchers: 2
- Forks: 2
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
- License: LICENSE
Awesome Lists containing this project
- awesome-argonone - panyingyun/argonone
README
# PI4-CASE-ARGON-ONE
Argon One Service and Control Service coding by golang for Raspberry Pi 4B/4B+ centos7.7 or other Pi Linux System
Enjoy it.
### 1、Hardware
- Raspberry Pi 4 Model B Rev 1.2
- PI4-CASE-ARGON-ONE
### 2、Rom & OS
- CentOS 7.7 [Download Rom and Flash to SD](!https://www.michaelapp.com/posts/2018/2018-09-13-%E6%A0%91%E8%8E%93%E6%B4%BE64%E4%BD%8DCentOS%E5%AE%89%E8%A3%85/)
### 3、Boot config file(very important,if not do this, application can not run normal.)
*open i2c dev driver*
```shell
### vim /boot/config.txt and add next info
dtparam=i2c_arm=on,i2c_arm_baudrate=32000
dtparam=i2s=on
dtparam=i2c_baudrate=32000
### vim /etc/modules-load.d/modules.conf and add next info
i2c-dev
i2c-bcm2835
i2c-bcm2708
```
### 4、Reboot && check config work or not
- (1) check i2c dirver work
```shell
[root@pinas2 modprobe.d]# lsmod | grep i2c
i2c_bcm2708 16384 0
i2c_bcm2835 16384 0
i2c_dev 20480 0
```
- (2) check i2c baudrate(32000 is OK)
```shell
[root@pinas2 tools]# cat /sys/module/i2c_bcm2708/parameters/baudrate
32000
```
- (3) check ARGON-ONE device('1a' is device address for fan)
```shell
[root@pinas2 tools]# yum install i2c-tools -y
[root@pinas2 tools]# i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- 1a -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
```
- (4) check cpu temp
```shell
[root@pinas2 tools]# cat /sys/class/thermal/thermal_zone0/temp
44790
```
### 5、How to build
```shell
//ssh to your board and prepare Pioneer600
//and install git tools
sudo apt-get update
sudo apt-get upgrade
sudo apt install -y vim git build-essential i2c-tools
sudo apt install -y golang
//clone code
git clone [email protected]:panyingyun/argonone.git
//build
cd argonone/cmd
//build arm
CGO_ENABLED=0 GOOS=linux GOARCH=arm go build -o argonone
```
### 6、How to run
```shell
argonone -c prod.yml
```
### 7、Auto-run when reboot OS
Run build_arm64.sh, it will autorun argonone when reboot os
```shell
chmod 755 build_arm64.sh
sudo sh build_arm64.sh
```
Other shell cmd
```shell
// enable
sudo systemctl enable argonone.service
// disable
sudo systemctl disable argonone.service
// start service
sudo systemctl start argonone.service
// stop
sudo systemctl stop argonone.service
// restart
sudo systemctl restart argonone.service
```
### 8、Check Result
**When CPU Temp from 41.381℃ to 39.92℃ ,and fan speed from 10% to stop.**
```shell
{"level":"INFO","ts":"2020-06-07 11:20:34","msg":"Raspberry Pi 4 Argonone Fan"}
{"level":"INFO","ts":"2020-06-07 11:20:34","msg":"Thanks to https://gobot.io"}
{"level":"INFO","ts":"2020-06-07 11:20:35","msg":"Current Temp is 41.381 ℃"}
{"level":"INFO","ts":"2020-06-07 11:20:35","msg":"FANOn10 ..."}
{"level":"INFO","ts":"2020-06-07 11:20:40","msg":"Current Temp is 40.894 ℃"}
{"level":"INFO","ts":"2020-06-07 11:20:40","msg":"FANOn10 ..."}
{"level":"INFO","ts":"2020-06-07 11:20:45","msg":"Current Temp is 39.92 ℃"}
{"level":"INFO","ts":"2020-06-07 11:20:45","msg":"FANOff ..."}
{"level":"INFO","ts":"2020-06-07 11:20:50","msg":"Current Temp is 39.92 ℃"}
{"level":"INFO","ts":"2020-06-07 11:20:50","msg":"FANOff ..."}
```
### 9、Thanks To
- https://github.com/Elrondo46/argonone
- http://www.waveshare.net/wiki/PI4-CASE-ARGON-ONE
- https://www.cnblogs.com/bcy520/p/6816310.html