https://github.com/pavanchhatpar/cooja-simulation

RPL network simulation using 6lowpan for a hospital, with security services added
https://github.com/pavanchhatpar/cooja-simulation

6lowpan authentication contiki-os cooja iot rpl simulation

Last synced: 5 days ago
JSON representation

RPL network simulation using 6lowpan for a hospital, with security services added

• Host: GitHub
• URL: https://github.com/pavanchhatpar/cooja-simulation
• Owner: pavanchhatpar
• Created: 2017-06-24T10:23:30.000Z (over 7 years ago)
• Default Branch: master
• Last Pushed: 2018-03-12T17:42:17.000Z (almost 7 years ago)
• Last Synced: 2024-10-30T07:30:25.712Z (about 2 months ago)
• Topics: 6lowpan, authentication, contiki-os, cooja, iot, rpl, simulation
• Language: Makefile
• Homepage:
• Size: 7.28 MB
• Stars: 2
• Watchers: 3
• Forks: 2
• Open Issues: 1
• Metadata Files:
  • Readme: README.md

Awesome Lists containing this project

README

        
# RPL Network Authentication

RPL network simulation using 6lowpan for a hospital, with authentication added

## Features

 - RPL network using 6lowpan

 - Authentication scheme that makes Brute Force and MITM attacks very tough

 - COAP REST Engine to allow collection of data from 6lowpan network via applications on the Internet

## Run an example

 - Open `multi-room-contiki3.csc`

 - Make sure `Serial Socket {Server}` is on

 - On a terminal inside `contiki-3.0/tools` run the following commands

   ```

   make tunslip6   # only if you haven't done this ever before, needed only once

   sudo ./tunslip6 -a 127.0.0.1 aaaa::1/64   #needs to be run everytime the simulation is run

   ```

 - Now Start the simulation, since there are a lot of motes, ample amount of time will be taken to generate routes and start exchanging data

 - COAP requests (via Mozilla Firefox) can be made to any of the sensor motes to get relevant information

 

## Points to remember

The simulated environment has some restrictions

 - Mote 1 should be `rpl border router`

 - Motes 2, 9, 16, 23 and so on need to necessarily be `RFID servers`

These restrictions are required to make sure all sensors can properly identify the `IP Address` of their respective `RFID nodes`