Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/pavelrevak/rt_soldering_pen
RT soldering pen project firmware
https://github.com/pavelrevak/rt_soldering_pen
cmake cpp oled soldering stm32
Last synced: 1 day ago
JSON representation
RT soldering pen project firmware
- Host: GitHub
- URL: https://github.com/pavelrevak/rt_soldering_pen
- Owner: pavelrevak
- License: gpl-3.0
- Created: 2018-06-23T06:23:36.000Z (over 6 years ago)
- Default Branch: master
- Last Pushed: 2021-02-01T09:26:30.000Z (almost 4 years ago)
- Last Synced: 2023-11-07T18:00:01.802Z (about 1 year ago)
- Topics: cmake, cpp, oled, soldering, stm32
- Language: C++
- Homepage: https://hackaday.io/project/18899-rt-soldering-pen
- Size: 521 KB
- Stars: 121
- Watchers: 24
- Forks: 22
- Open Issues: 9
-
Metadata Files:
- Readme: README.md
- License: LICENSE
Awesome Lists containing this project
README
# RT soldering pen
![oled4]
[Manual]
This firmware is for my project [RT soldering pen](https://hackaday.io/project/18899-rt-soldering-pen)
You can buy HW at [Tindie](https://www.tindie.com/products/vlk/rt-soldering-pen/)
## Building and flashing
### Requirements
- [`arm-gcc`](https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads)
- [`cmake`](https://cmake.org/download/)
- `make` or [`ninja`](https://github.com/ninja-build/ninja)
- STM flashing SW and HW (ST-Link/V2 or any ST dev-kit, like Discovery or Nucleo board)
Building is possible on Linux, Mac and also on Windows
### Getting source
```sh
git clone --recursive https://github.com/pavelrevak/rt_soldering_pen.git
cd rt_soldering_pen
```
### Building
```sh
mkdir _build
cd _build
cmake -D CMAKE_TOOLCHAIN_FILE=../cmake/arm-none-eabi.cmake -D CMAKE_BUILD_TYPE=Release ..
make
```
### Flashing
Connect ST-Link or other SWD programmer:
#### HW v0.3
- G : GND
- C : SWCLK
- D : SWDIO
#### HW v1.0
- C : SWCLK
- G : GND
- D : SWDIO
If you have installed [pystlink](https://github.com/pavelrevak/pystlink) and is in search path just type:
```sh
make flash
```
If you have another flashing utility you can generate hex of binary file:
```sh
make srec
```
or building also support other targets `hex` and `bin`
Final files are saved in `_build` folder
[manual]: doc/MANUAL.md "Manual"
[oled4]: doc/oled4.png "Screenshot"