https://github.com/poeschl/p-cube-klipper
The configuration of the klipper/Moonraker/Mainsail installation of my 3d printer.
https://github.com/poeschl/p-cube-klipper
klipper-configuration mainsail moonraker
Last synced: 3 months ago
JSON representation
The configuration of the klipper/Moonraker/Mainsail installation of my 3d printer.
- Host: GitHub
- URL: https://github.com/poeschl/p-cube-klipper
- Owner: Poeschl
- Created: 2023-08-05T15:15:15.000Z (almost 2 years ago)
- Default Branch: main
- Last Pushed: 2024-01-05T12:57:06.000Z (over 1 year ago)
- Last Synced: 2025-01-24T04:53:22.441Z (5 months ago)
- Topics: klipper-configuration, mainsail, moonraker
- Language: G-code
- Homepage:
- Size: 386 KB
- Stars: 1
- Watchers: 2
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
# P-Cube Klipper config
This is my backup place for my currently used klipper config file.
It is base on [MainsailOS](https://docs-os.mainsail.xyz/) and includes all of my custom files.
* [Klipper Config Ref](https://www.klipper3d.org/Config_Reference.html)
* [Klipper TMC](https://www.klipper3d.org/TMC_Drivers.html)
* [Klipper GCodes](https://www.klipper3d.org/G-Codes.html)
* [Moonraker (API) Config](https://moonraker.readthedocs.io/en/latest/configuration/)
* [KlipperScreen (Touchscreen) Config](https://klipperscreen.readthedocs.io/en/latest/Configuration/)
* [CrowsNest (CamProxy) Config](https://crowsnest.mainsail.xyz/configuration/sample-config)
* [Spoolman](https://github.com/Donkie/Spoolman)
* [Klipper Adaptive Meshing & Purging](https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging)
* [Klipper LED effects](https://github.com/julianschill/klipper-led_effect)
## Install peripherals
### Enable direct serial via 3-wire
Issue with instructions: https://github.com/Klipper3d/klipper/issues/2913
#### tl;dr
##### Adjust `/boot/config.txt`
The following lines worked for me:
```text
enable_uart=1
dtoverlay=disable-bt
dtoverlay=pi3-miniuart-bt
```
##### Adjust `/boot/cmdline.txt`
Make sure no console is specified for UART debugging.
##### Adjust `printer.cfg`
```cfg
[mcu]
serial: /dev/ttyAMA0
restart_method: command
```
### Touchscreen Rotation
* Comment out line `dtoverlay=vc4-kms-v3d` ➡ `#dtoverlay=vc4-kms-v3d`
* Add line `display_rotate=2` to rotate for 180°
### Touchscreen Driver
⚠ __DON'T ever use the install scripts of them__ ⚠ (They will overwrite all existing config and do strange stuff)
https://joy-it.net/de/products/RB-LCD-5
Setup instructions: https://www.waveshare.com/wiki/5inch_HDMI_LCD
#### tl;dr
##### Edit `/boot/config.txt`
Add the following lines
```text
hdmi_group=2
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0
hdmi_drive=1
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
```
##### Do touch calibration
```bash
# Install packages
sudo apt-get install xserver-xorg-input-evdev xinput-calibrator -y
# Copy configs to later time executed
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
# Add touch panel options
sudo tee /usr/share/X11/xorg.conf.d/99-calibration.conf > /dev/null <