https://github.com/pzl/bbcase

3D printed case design for Bus Blaster v4
https://github.com/pzl/bbcase

3dprinting bus-blaster openscad

Last synced: 7 days ago
JSON representation

3D printed case design for Bus Blaster v4

• Host: GitHub
• URL: https://github.com/pzl/bbcase
• Owner: pzl
• Created: 2014-04-21T17:51:35.000Z (over 10 years ago)
• Default Branch: master
• Last Pushed: 2015-02-27T20:31:35.000Z (over 9 years ago)
• Last Synced: 2024-04-30T07:16:46.805Z (7 months ago)
• Topics: 3dprinting, bus-blaster, openscad
• Language: OpenSCAD
• Size: 191 KB
• Stars: 1
• Watchers: 2
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: readme.md

Awesome Lists containing this project

README

        
bbcase

------

I wanted a 3D-printed case for my busblaster, and this is the result. I modeled the actual bus blaster (v4.1a) first (see: busblaster.scad) and created a case around that model.

The case bottom has grooves to fit the protruding pins. The case top has cutouts for the jumpers and main pin header. There is a little extra cutout in the header section, and angled edge to allow a viewing window to the silkscreened pin labels on the board itself. The top case has a hole to fit the USB port, and two viewing windows and reflectors for the power and act LEDs, to be viewed from the side.

I put an optional cutout above the FPGA to allow some heat to escape, that file is not included here, but is in the STL