https://github.com/quintusjoyal/avr-irremote-led-lamp
the signals on the bus go blink, blink, blink
https://github.com/quintusjoyal/avr-irremote-led-lamp
arduino atmega328p avr avr-gcc avrdude c docker gerber irremote kicad kicad-pcb led pcb workflow
Last synced: 2 months ago
JSON representation
the signals on the bus go blink, blink, blink
- Host: GitHub
- URL: https://github.com/quintusjoyal/avr-irremote-led-lamp
- Owner: QuintusJoyal
- Created: 2024-04-19T12:56:03.000Z (about 1 year ago)
- Default Branch: main
- Last Pushed: 2024-05-04T18:04:54.000Z (about 1 year ago)
- Last Synced: 2025-01-25T11:44:21.081Z (4 months ago)
- Topics: arduino, atmega328p, avr, avr-gcc, avrdude, c, docker, gerber, irremote, kicad, kicad-pcb, led, pcb, workflow
- Language: C
- Homepage:
- Size: 940 KB
- Stars: 2
- Watchers: 1
- Forks: 1
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
# AVR IR remote LED lamp
This project implements an infrared (IR) remote-controlled LED system using an AVR microcontroller. It allows users to adjust LED brightness and toggle RGB LED colors using a compatible IR remote control.
## Features
- Adjust RGB LED colors with volume up and down commands.
- Control LED brightness with channel up and down commands.
- Turn off all LEDs with the power command.
- Smooth LED dimming achieved through software PWM.
## Hardware Requirements
- AVR microcontroller (e.g., ATmega328P or Arduino uno)
- 1x IR receiver (VS1838B)
- 5x LEDs
- 4x single-color
- 1x RKGB
- 7x 330 Ohms resistors
- 1x IR remote control
- 1x Power supply (9V)
---
>For PCB
>- 2x 20pf ceramic capacitors
>- 2x 10uf 50V electrolytic capacitor
>- 1x 16Mhz crystal osclilator
>- 1x 100 Ohms resistors
>- 2x 10k Ohms resistors
>- 1x PCB mount DC jack
>- 1x 28 pin IC socket
>- 1x 1x5 Female header SIL
>- 1x 7805 5V voltage regulator
>- 1x ATMEGA328P IC
---
## Diagram
||
|:--:|
|Prototype|
||
||
|PCB|
||
||
|Pinout|
||
||
## Software Requirements
- AVR-GCC toolchain
- AVRDUDE (for flashing the microcontroller)
- Required AVR libraries (included in the [`./src/libs`](./src/libs) directory)
- [IRremote.h](./src/libs/IRremote.h)
- [softwarePWM.h](./src/libs/softwarePWM.h)
- [uart.h](./src/libs/uart.h) (Optional)
## Installation
1. Connect the hardware components according to the schematic.
2. Clone this repository to your local machine.
3. Compile the source code using the AVR-GCC toolchain.
```bash
make all
```
4. Flash the compiled binary onto the AVR microcontroller using AVRDUDE.
```bash
make flash
```
---
>Build the docker image for easy toolchain deployment
>1. Build the image
>```
>docker build -f Dockerfile -t avr-dev .
>```
>2. Run the container
>```
>docker run --rm -it --name avr-dev --device=/dev/ttyACM0 avr-dev
>```
>3. Flash
>```
>make flash
>```
---
## Usage
1. Power on the system.
2. Point the IR remote control towards the IR receiver module.
3. Press the appropriate buttons on the remote control to control the LEDs:
- Volume up/down: Change RGB LED colors.
- Channel up/down: Adjust LED brightness.
- Power: Turn off all LEDs.
4. LED status updates will be displayed via UART communication (if needed).
## Notes
- Uncomment uart if needed.
- You may need to change command codes according to your IR remote, use uart to find your codes.
- Changing ports have to be changed in [softwarePWM.h](./src/libs/softwarePWM.h)'s channel sections.
## References
- [IRremote.h](https://www.programming-electronics-diy.xyz/2022/08/ir-remote-control-library-for-avr.html) - Liviu Istrate
- [softwarePWM.h](https://www.programming-electronics-diy.xyz/2021/02/multi-channel-software-pwm-library-for.html) - Liviu Istrate
## Contributions
Contributions are welcome! Feel free to submit bug reports, feature requests, or pull requests.