Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/radicallyopensecurity/netaidkit
Standalone VPN/Tor WiFi router for journalists and activists
https://github.com/radicallyopensecurity/netaidkit
Last synced: 25 days ago
JSON representation
Standalone VPN/Tor WiFi router for journalists and activists
- Host: GitHub
- URL: https://github.com/radicallyopensecurity/netaidkit
- Owner: radicallyopensecurity
- License: gpl-2.0
- Archived: true
- Created: 2016-03-14T13:26:34.000Z (over 8 years ago)
- Default Branch: 1.0
- Last Pushed: 2017-01-18T17:12:59.000Z (almost 8 years ago)
- Last Synced: 2024-08-03T17:12:11.617Z (4 months ago)
- Language: Makefile
- Size: 131 KB
- Stars: 29
- Watchers: 13
- Forks: 7
- Open Issues: 52
-
Metadata Files:
- Readme: README.md
- License: LICENSE
Awesome Lists containing this project
- awesome-network-stuff - **29**星
README
NetAidKit
====
Standalone VPN/Tor router for journalists and activists.
Building the firmware image
----
Install dependencies
```bash
sudo apt-get update
sudo apt-get install git-core build-essential libssl-dev libncurses5-dev unzip subversion gawk python python-passlib jq
```
Create a working directory somewhere and execute the following commands:
```bash
git clone https://github.com/radicallyopensecurity/netaidkit
cd netaidkit && make image
```
You'll find the image in netaidkit/openwrt/bin directory.
Development image
----
For development image, use:
```bash
make dev_image
```
ssh port: 2222
ssh password: `K@qt1)pLMto
Flashing the GL-iNet:
----
- While pressing the reset button on the side of the GL-iNet,
power on the device. You will see the green LED flashing.
Hold the reset button until the green LED flashes 5 times.
When the red light flashes once, release your finger.
The device is now booting into failsafe mode.
- Connect to the device using an ethernet cable and manually
set your IP address to 192.168.1.2.
- Visit 192.168.1.1 in your browser and upload the image called
openwrt-ar71xx-generic-gl-inet-6416A-v1-squashfs-factory.bin
to the page and click 'Update firmware'. Wait for the device to
reboot into the new firmware and do not turn it off.
Set-up
----
Connect to the NETAIDKIT access point using password 'netaidkit'. Browse to 192.168.101.1 and follow the steps to set-up your own AP and change the passwords.
Disconnect from wifi
----
To disconnect from a wifi network, press the reset button on the side of the device once (do not hold, simply press)