Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/raspberrypi/pico-sdk
https://github.com/raspberrypi/pico-sdk
Last synced: 4 days ago
JSON representation
- Host: GitHub
- URL: https://github.com/raspberrypi/pico-sdk
- Owner: raspberrypi
- License: bsd-3-clause
- Created: 2021-01-20T17:30:11.000Z (almost 4 years ago)
- Default Branch: master
- Last Pushed: 2024-12-06T16:39:04.000Z (15 days ago)
- Last Synced: 2024-12-10T06:03:23.281Z (12 days ago)
- Language: C
- Size: 5.06 MB
- Stars: 3,817
- Watchers: 112
- Forks: 960
- Open Issues: 231
-
Metadata Files:
- Readme: README.md
- Contributing: CONTRIBUTING.md
- License: LICENSE.TXT
Awesome Lists containing this project
- awesome-raspberrypipico - Pico SDK Repo - Official Raspberry Pi Pico SDK repository. (Software/Tools)
- AiTreasureBox - raspberrypi/pico-sdk - 12-20_3837_2](https://img.shields.io/github/stars/raspberrypi/pico-sdk.svg)|| (Repos)
README
# Raspberry Pi Pico SDK
The Raspberry Pi Pico SDK (henceforth the SDK) provides the headers, libraries and build system
necessary to write programs for the RP-series microcontroller-based devices such as the Raspberry Pi Pico or Raspberry Pi Pico 2
in C, C++ or assembly language.
The SDK is designed to provide an API and programming environment that is familiar both to non-embedded C developers and embedded C developers alike.
A single program runs on the device at a time and starts with a conventional `main()` method. Standard C/C++ libraries are supported along with
C-level libraries/APIs for accessing all of the RP-series microcontroller's hardware including PIO (Programmable IO).
Additionally, the SDK provides higher level libraries for dealing with timers, synchronization, Wi-Fi and Bluetooth networking, USB and multicore programming. These libraries should be comprehensive enough that your application code rarely, if at all, needs to access hardware registers directly. However, if you do need or prefer to access the raw hardware registers, you will also find complete and fully-commented register definition headers in the SDK. There's no need to look up addresses in the datasheet.
The SDK can be used to build anything from simple applications, fully-fledged runtime environments such as MicroPython, to low level software
such as the RP-series microcontroller's on-chip bootrom itself.
The design goal for entire SDK is to be simple but powerful.
Additional libraries/APIs that are not yet ready for inclusion in the SDK can be found in [pico-extras](https://github.com/raspberrypi/pico-extras).
# Documentation
See [Getting Started with the Raspberry Pi Pico-Series](https://rptl.io/pico-get-started) for information on how to setup your
hardware, IDE/environment and how to build and debug software for the Raspberry Pi Pico and other RP-series microcontroller based devices.
See [Connecting to the Internet with Raspberry Pi Pico W](https://rptl.io/picow-connect) to learn more about writing
applications for your Raspberry Pi Pico W that connect to the internet.
See [Raspberry Pi Pico-Series C/C++ SDK](https://rptl.io/pico-c-sdk) to learn more about programming using the
SDK, to explore more advanced features, and for complete PDF-based API documentation.
See [Online Raspberry Pi Pico SDK API docs](https://rptl.io/pico-doxygen) for HTML-based API documentation.
# Example code
See [pico-examples](https://github.com/raspberrypi/pico-examples) for example code you can build.
# Getting the latest SDK code
The [master](https://github.com/raspberrypi/pico-sdk/tree/master/) branch of `pico-sdk` on GitHub contains the
_latest stable release_ of the SDK. If you need or want to test upcoming features, you can try the
[develop](https://github.com/raspberrypi/pico-sdk/tree/develop/) branch instead.
# Quick-start your own project
## Using Visual Studio Code
You can install the [Raspberry Pi Pico Visual Studio Code extension](https://marketplace.visualstudio.com/items?itemName=raspberry-pi.raspberry-pi-pico) in VS Code.
## Unix command line
These instructions are extremely terse, and Linux-based only. For detailed steps,
instructions for other platforms, and just in general, we recommend you see [Raspberry Pi Pico-Series C/C++ SDK](https://rptl.io/pico-c-sdk)
1. Install CMake (at least version 3.13), python 3, a native compiler, and a GCC cross compiler
```
sudo apt install cmake python3 build-essential gcc-arm-none-eabi libnewlib-arm-none-eabi libstdc++-arm-none-eabi-newlib
```
1. Set up your project to point to use the Raspberry Pi Pico SDK
* Either by cloning the SDK locally (most common) :
1. `git clone` this Raspberry Pi Pico SDK repository
1. Copy [pico_sdk_import.cmake](https://github.com/raspberrypi/pico-sdk/blob/master/external/pico_sdk_import.cmake)
from the SDK into your project directory
2. Set `PICO_SDK_PATH` to the SDK location in your environment, or pass it (`-DPICO_SDK_PATH=`) to cmake later.
3. Setup a `CMakeLists.txt` like:
```cmake
cmake_minimum_required(VERSION 3.13...3.27)
# initialize the SDK based on PICO_SDK_PATH
# note: this must happen before project()
include(pico_sdk_import.cmake)
project(my_project)
# initialize the Raspberry Pi Pico SDK
pico_sdk_init()
# rest of your project
```
* Or with the Raspberry Pi Pico SDK as a submodule :
1. Clone the SDK as a submodule called `pico-sdk`
1. Setup a `CMakeLists.txt` like:
```cmake
cmake_minimum_required(VERSION 3.13...3.27)
# initialize pico-sdk from submodule
# note: this must happen before project()
include(pico-sdk/pico_sdk_init.cmake)
project(my_project)
# initialize the Raspberry Pi Pico SDK
pico_sdk_init()
# rest of your project
```
* Or with automatic download from GitHub :
1. Copy [pico_sdk_import.cmake](https://github.com/raspberrypi/pico-sdk/blob/master/external/pico_sdk_import.cmake)
from the SDK into your project directory
1. Setup a `CMakeLists.txt` like:
```cmake
cmake_minimum_required(VERSION 3.13)
# initialize pico-sdk from GIT
# (note this can come from environment, CMake cache etc)
set(PICO_SDK_FETCH_FROM_GIT on)
# pico_sdk_import.cmake is a single file copied from this SDK
# note: this must happen before project()
include(pico_sdk_import.cmake)
project(my_project)
# initialize the Raspberry Pi Pico SDK
pico_sdk_init()
# rest of your project
```
* Or by cloning the SDK locally, but without copying `pico_sdk_import.cmake`:
1. `git clone` this Raspberry Pi Pico SDK repository
2. Setup a `CMakeLists.txt` like:
```cmake
cmake_minimum_required(VERSION 3.13)
# initialize the SDK directly
include(/path/to/pico-sdk/pico_sdk_init.cmake)
project(my_project)
# initialize the Raspberry Pi Pico SDK
pico_sdk_init()
# rest of your project
```
1. Write your code (see [pico-examples](https://github.com/raspberrypi/pico-examples) or the [Raspberry Pi Pico-Series C/C++ SDK](https://rptl.io/pico-c-sdk) documentation for more information)
About the simplest you can do is a single source file (e.g. hello_world.c)
```c
#include
#include "pico/stdlib.h"
int main() {
stdio_init_all();
printf("Hello, world!\n");
return 0;
}
```
And add the following to your `CMakeLists.txt`:
```cmake
add_executable(hello_world
hello_world.c
)
# Add pico_stdlib library which aggregates commonly used features
target_link_libraries(hello_world pico_stdlib)
# create map/bin/hex/uf2 file in addition to ELF.
pico_add_extra_outputs(hello_world)
```
Note this example uses the default UART for _stdout_;
if you want to use the default USB see the [hello-usb](https://github.com/raspberrypi/pico-examples/tree/master/hello_world/usb) example.
1. Setup a CMake build directory.
For example, if not using an IDE:
```
$ mkdir build
$ cd build
$ cmake ..
```
When building for a board other than the Raspberry Pi Pico, you should pass `-DPICO_BOARD=board_name` to the `cmake` command above, e.g. `cmake -DPICO_BOARD=pico2 ..` or `cmake -DPICO_BOARD=pico_w ..` to configure the SDK and build options accordingly for that particular board.
Specifying `PICO_BOARD=` sets up various compiler defines (e.g. default pin numbers for UART and other hardware) and in certain
cases also enables the use of additional libraries (e.g. wireless support when building for `PICO_BOARD=pico_w`) which cannot
be built without a board which provides the requisite hardware functionality.
For a list of boards defined in the SDK itself, look in [this directory](src/boards/include/boards) which has a
header for each named board.
1. Make your target from the build directory you created.
```sh
$ make hello_world
```
1. You now have `hello_world.elf` to load via a debugger, or `hello_world.uf2` that can be installed and run on your Raspberry Pi Pico-series device via drag and drop.
# RISC-V support on RP2350
See [Raspberry Pi Pico-series C/C++ SDK](https://rptl.io/pico-c-sdk) for information on setting up a build environment for RISC-V on RP2350.