https://github.com/rhaamo/simhub-esp32-peugeot-407
Trying to make that cursed cluster work with SimHub through an ESP32
https://github.com/rhaamo/simhub-esp32-peugeot-407
canbus esp32 peugeot peugeot-407 simhub
Last synced: 4 months ago
JSON representation
Trying to make that cursed cluster work with SimHub through an ESP32
- Host: GitHub
- URL: https://github.com/rhaamo/simhub-esp32-peugeot-407
- Owner: rhaamo
- Created: 2025-04-19T17:29:12.000Z (6 months ago)
- Default Branch: main
- Last Pushed: 2025-04-20T18:50:37.000Z (6 months ago)
- Last Synced: 2025-04-23T13:58:37.955Z (6 months ago)
- Topics: canbus, esp32, peugeot, peugeot-407, simhub
- Language: C++
- Homepage:
- Size: 712 KB
- Stars: 0
- Watchers: 1
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
# SimHub ESP32 Peugeot 407 CAN thingy
Based on:
- code base from https://github.com/eCrowneEng/ESP-SimHub
- cluster CAN code from https://github.com/fmiglior/simhub-psa-dashboard
- https://autowp.github.io/
The magic is in `SHCustomProtocol.h` and `can.h` where the packets are defined and some debug infos put in.
In the repository is a log from a working bus made with savvy can...
This is made to use one of the smol 3.3V CAN transceiver since the ESP32 already have a CAN controller builtin.
BUT REMOVES THE 120R RESISTOR ! It's the one that is right on top of CANH/L pins. With it it won't work.
Connect TX=D5 and RX=D4.
Use TX2 (pins D16&D17) on an external FTDI to uses the Serial2 output (will shows received frames, and later more infos on what the fw is doing).
# TODO
Fix the various issues with some parts (gearbox speed for ex.).
Make the CAN messages more modular (to handle multiple clusters with only one firmware).
# SimHub
Uses the following custom protocol JAVASCRIPT code:
```javascript
// Game specific
var game = $prop('DataCorePlugin.CurrentGame');
var gameID = 0; // no specifics
if (game == 'ETS2' || game == 'ATS') {
gameID = 1;
} else if (game == 'BeamNgDrive') {
gameID = 2;
} else if (game == 'AssettoCorsa') {
gameID = 3;
}
// Cluster
var cluster = 0; // Peugeot 407
// Game datas
var speed = format($prop('SpeedKmh'), 0);
var rpms = format($prop('Rpms'), 0);
var fuel = format($prop('DataCorePlugin.Computed.Fuel_Percent'), 0);
var waterTemp = format($prop('WaterTemperature'), 0);
var oilTemperature = format($prop('OilTemperature'), 0);
var handbrake = format($prop('Handbrake'), 0);
var turnLeft = $prop('TurnIndicatorLeft');
var turnRight = $prop('TurnIndicatorRight');
var tcActive = $prop('TCActive');
var absActive = $prop('ABSActive');
var gear = $prop('Gear');
// TODO check if the same value in ETS2/forza for ex
var parkingLight = $prop('DataCorePlugin.GameRawData.light_Parkingbrake');
var lowBeam = $prop('DataCorePlugin.GameRawData.light_LowBeam');
var highBeam = $prop('DataCorePlugin.GameRawData.light_HighBeam');
var ignition = $prop('DataCorePlugin.GameData.EngineIgnitionOn');
return `${gameID};${cluster};${speed};${rpms};${fuel};${waterTemp};${oilTemperature};${handbrake};${turnLeft};${turnRight};${tcActive};${absActive};${gear};${parkingLight};${lowBeam};${highBeam};${ignition};\n`
```
# Peugeot 407
Tested with a Phase 1 (2008) cluster, in KM/h with RPM gauge up to 6k.
Could also work with a Citroen C3 Phase.
- [x] Water temp (L gauge) (works but need calibration)
- [x] Oil temp (R gauge) (works but need calibration)
- [x] RPM
- [x] Speed
- [x] Tank level (need cal?)
- [x] Ignition (cluster on/off I guess)
- [ ] LCD
- [ ] Total distance
- [ ] Trip distance
- [ ] Gearbox indicator
- [ ] Speed limit/cruise control
- [ ] Other/Warnings
- [ ] Indicators (lighting)
- [x] main beam
- [x] dipped beam
- [ ] front fog
- [ ] rear fog
- [ ] Indicators (warnings)
- [ ] front seat belts
- [ ] fuel level
- [x] left turn
- [x] Indicators (warnings)
- [x] parking brake
- [x] right turn
- [ ] Indicators (warning)
- [ ] emission control system
- [x] ABS
- [ ] passenger airbag
- [ ] pre-heat (diesel)
- [ ] Lighting levels
- [ ] Buttons
- [ ] Lighting
- [ ] Reset