https://github.com/rishit-dagli/using-control-p5-in-processing-with-arduino

https://github.com/rishit-dagli/using-control-p5-in-processing-with-arduino

arduino controlp5 processing servo

Last synced: 2 days ago
JSON representation

• Host: GitHub
• URL: https://github.com/rishit-dagli/using-control-p5-in-processing-with-arduino
• Owner: Rishit-dagli
• License: mit
• Created: 2018-05-31T12:10:23.000Z (over 6 years ago)
• Default Branch: master
• Last Pushed: 2019-04-05T11:52:40.000Z (almost 6 years ago)
• Last Synced: 2024-12-17T16:48:31.431Z (about 2 months ago)
• Topics: arduino, controlp5, processing, servo
• Language: C++
• Size: 17.6 KB
• Stars: 3
• Watchers: 3
• Forks: 0
• Open Issues: 0
• Metadata Files:
  • Readme: README.md
  • License: LICENSE

Awesome Lists containing this project

README

        
# using-control-p5-in-processing-with-arduino

Use control p5 to create buttons in processing and use them to control 7 segment or a servo connected to an arduino.

Note that you need to change the port number according to the port assigned by the laptop to your arduino.

The buttons in the servo file are used to move a servo at different angles.

For the seven segment program I have added a mod logic to control the seven segment accordingly if the button is pressed second time.

For it to run upload the arduino code on the board and simultaneously run the processing file.

Pin numbers:

  Servo - 7     

  7 segment(in alphabetical order)refer the image

    2,3,4,5,6,7,8,9