https://github.com/russ-hensel/piplatform
Mounting platform for Raspberry Pi and other Modules 3D Printed, FreeCad files
https://github.com/russ-hensel/piplatform
3d freecad model pi printing raspberry
Last synced: 3 months ago
JSON representation
Mounting platform for Raspberry Pi and other Modules 3D Printed, FreeCad files
- Host: GitHub
- URL: https://github.com/russ-hensel/piplatform
- Owner: russ-hensel
- Created: 2018-01-05T01:49:55.000Z (over 7 years ago)
- Default Branch: master
- Last Pushed: 2019-05-03T14:50:36.000Z (about 6 years ago)
- Last Synced: 2025-02-05T22:30:36.111Z (4 months ago)
- Topics: 3d, freecad, model, pi, printing, raspberry
- Homepage: http://www.opencircuits.com/Raspbery_Pi_Mounting_Platform_and_Bracket
- Size: 1.12 MB
- Stars: 3
- Watchers: 1
- Forks: 0
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
# PiPlatform
What:
This is a 3D design for mounting a raspberry pi and for mounting additional modules on top of it. Think it is ok but still testing and tinkering with it.
Status:
```
Working pretty well, in process of adding some additional mounting options.
Have printed and used about 5 of these so far, pretty happy with them.
Standard Disclaimer:
If you have more than a casual interest in this project you should contact me
( no_spam_please_666 at comcast.net )and see if the repository is actually in good shape.
I may well have improved software and or documentation.
I will try to answer all questions and perhaps even clean up what already exists.
```
Documentation:
Some off site wiki info at: http://www.opencircuits.com/Raspberry_Pi_Mounting_Platform_and_Bracket
that has some pictures and directions. Still working on them as well.
At Instructables: Raspberry Pi Platform: 7 Steps
https://www.instructables.com/id/Raspberry-Pi-Platform/
File guide:
```
assm_2.FCStd ----- my first messing around with an assembly file, just for fun right now.
pi_as_step.FCStd ----- this is a file I grabed from the internet, I need attribution. Was a step file imported into freecad then saved.
PiPillar.FCStd ----- this is the platform and extensions. is not perfect, but I think usable.
Spacers.FCStd ----- just some spaces to help bolt thing onto the platform, customize them for your use. I am working on some more complicated ones that I plan to melt or force or both into place, later.
uno_bracket.FCStd ----- this is a bracket for mounting an arduino uno or perhaps a nano, a little sucker I got on ebay.
```