Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/rwth-afu/UniPager
Universal POCSAG transmitter controller written in Rust.
https://github.com/rwth-afu/UniPager
amateur-radio ham-radio pocsag rust
Last synced: 8 days ago
JSON representation
Universal POCSAG transmitter controller written in Rust.
- Host: GitHub
- URL: https://github.com/rwth-afu/UniPager
- Owner: rwth-afu
- License: gpl-3.0
- Created: 2016-11-11T22:09:43.000Z (about 8 years ago)
- Default Branch: master
- Last Pushed: 2024-02-17T14:40:05.000Z (9 months ago)
- Last Synced: 2024-08-02T00:22:07.732Z (4 months ago)
- Topics: amateur-radio, ham-radio, pocsag, rust
- Language: Rust
- Homepage:
- Size: 799 KB
- Stars: 85
- Watchers: 15
- Forks: 26
- Open Issues: 37
-
Metadata Files:
- Readme: README.md
- License: LICENSE
Awesome Lists containing this project
- awesome-hamradio - UniPager
README
# UniPager
[](https://travis-ci.org/rwth-afu/UniPager)
[](https://github.com/rwth-afu/UniPager/issues)
[](https://github.com/rwth-afu/UniPager/releases)
Universal POCSAG transmitter controller written in Rust.
## Automatic Installation
This script installs UniPager fully automatically on Debian/Raspbian systems.
It also uninstalls RustPager and migrates the old configuration file.
```bash
# Via HAMNET
curl http://db0sda.ampr.org/debian/install.sh -sSf | sh -s -- hamnet
# Via Internet
curl http://www.afu.rwth-aachen.de/debian/install.sh -sSf | sh -s -- internet
```
## Configuration
The web interface for configuration is available on port `8073`. Port `8055`
must also be open to allow websocket communication between the browser and
UniPager.
### Raspberry Pi
Make sure that the serial port is activated. To do this add `enable_uart=1` to
`/boot/config.txt`, remove `console=ttyAMA0,115200` from `/boot/cmdline.txt` and
reboot.
This is not needed for the RASPAGERV1 and Audio transmitter type.
## Update
Once the package is installed, you can install updates as for every other debian package with the following commands:
```bash
sudo apt-get update
sudo apt-get upgrade
```
## Manual Installation from HAMNET
Create the file `/etc/apt/sources.list.d/unipager.list` with the following content:
```
deb http://db0sda.ampr.org/debian unipager main
deb-src http://db0sda.ampr.org/debian unipager main
```
Then execute the following commands:
```bash
wget -O - http://ci.db0sda.ampr.org/debian/rwth-afu.key | sudo apt-key add -
sudo apt-get update
sudo apt-get install unipager
```
## Manual Installation from Internet
Create the file `/etc/apt/sources.list.d/unipager.list` with the following content:
```
deb http://www.afu.rwth-aachen.de/debian unipager main
deb-src http://www.afu.rwth-aachen.de/debian unipager main
```
Then execute the following commands:
```bash
wget -O - http://www.afu.rwth-aachen.de/debian/rwth-afu.key | sudo apt-key add -
sudo apt-get update
sudo apt-get install unipager
```
## Local Compilation from source
Install rust:
```bash
curl https://sh.rustup.rs -sSf | sh -s -- --default-toolchain nightly
```
Now reboot OR log out to make the rust toolchain available.
Log in again and clone the source:
```bash
git clone https://github.com/rwth-afu/UniPager.git
```
If this command fails, you may need to install git and try again:
```bash
sudo apt-get install git
```
Start the build:
```bash
cd UniPager
cargo build --release
```
The compiled binary will be created at `./target/release/unipager`.
Be aware: Must be run with root privileges for GPIO access. Secondly it may be required to disable Bluetooth on newer Raspberry Pi models to make the GPIO UART usable.
## Local Cross Compilation from source
Install rust:
```bash
curl https://sh.rustup.rs -sSf | sh -s -- --default-toolchain nightly
```
Install the GCC cross compiler:
```bash
sudo apt-get install -qq gcc-arm-linux-gnueabi # for soft float
sudo apt-get install -qq gcc-arm-linux-gnueabihf # for hard float
```
Define the target:
```bash
# ARMv6 with soft float
export TARGET="arm-unknown-linux-gnueabi"
# ARMv6 with hard float (e.g. Raspberry Pi 1)
export TARGET="arm-unknown-linux-gnueabihf"
# ARMv7 with hard float (e.g. Raspberry Pi 2 and 3)
export TARGET="armv7-unknown-linux-gnueabihf"
```
Install the cross-compiled rust libraries:
```bash
rustup target add $TARGET
```
Create the file `~/.cargo/config` with the following content:
```toml
[target.arm-unknown-linux-gnueabi]
linker = "arm-linux-gnueabi-gcc"
[target.arm-unknown-linux-gnueabihf]
linker = "arm-linux-gnueabihf-gcc"
[target.armv7-unknown-linux-gnueabihf]
linker = "arm-linux-gnueabihf-gcc"
```
Clone the source:
```bash
git clone https://github.com/rwth-afu/UniPager.git
```
Start the build:
```bash
cd UniPager
cargo build --target $TARGET --release
```
The cross-compiled binary will be created at `./target/$TARGET/release/unipager`.
## Manual Installation after compilation
Move the UniPager binary to `/usr/local/bin/unipager`. Create the directory
`/var/lib/unipager`. Create the file `/etc/systemd/system/unipager.service` with
the following content:
```
[Unit]
Description=UniPager POCSAG transmitter controller
After=network.target
[Service]
ExecStart=/usr/local/bin/unipager
WorkingDirectory=/var/lib/unipager
[Install]
WantedBy=multi-user.target
```
Reload systemctl configuration with `sudo systemctl daemon-reload`.
To start UniPager enter `sudo systemctl start unipager`. To start UniPager
automatically after booting enter `sudo systemctl enable unipager`.
## Authors
### Author and Maintainer
- Thomas Gatzweiler (DL2IC)
### Contributors
- Mathis Schmieder (DB9MAT)
- Florian Wolters (DF2ET)
- Ralf Wilke (DH3WR)
- Johannes Gierlach (DJ7LC)
- Robert Wittek (OE1RXW)
## License
UniPager
Copyright (C) 2017-2021 RWTH Amateurfunkgruppe
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .