Ecosyste.ms: Awesome
An open API service indexing awesome lists of open source software.
https://github.com/s-chivikov/asterisk-dongle
asterisk-dongle
https://github.com/s-chivikov/asterisk-dongle
Last synced: 15 days ago
JSON representation
asterisk-dongle
- Host: GitHub
- URL: https://github.com/s-chivikov/asterisk-dongle
- Owner: s-chivikov
- Created: 2015-08-28T22:32:20.000Z (about 9 years ago)
- Default Branch: master
- Last Pushed: 2015-08-29T03:05:42.000Z (about 9 years ago)
- Last Synced: 2024-07-03T06:33:10.977Z (4 months ago)
- Size: 145 KB
- Stars: 5
- Watchers: 1
- Forks: 4
- Open Issues: 0
-
Metadata Files:
- Readme: README.md
Awesome Lists containing this project
README
asterisk-dongle
===============
**only for test! not working now!**
"asterisk-dongle" docker image is a vanilla Asterisk Certified PBX compilation on GNU/Linux Debian 8 and chan_dongle module for Asterisk 13.
This is "fork" of: https://hub.docker.com/r/linuxconfig/asterisk/
This Docker container:
- Debian 8
- Asterisk 13.1 Certified PBX compilation (https://hub.docker.com/r/linuxconfig/asterisk/)
- chan_dongle module for Asterisk 13 (https://github.com/oleg-krv/asterisk-chan-dongle )
- Russian voice for Asterisk (https://github.com/pbxware/asterisk-sounds)
You can mount usb devices in the container using privileged mode and the volumes option:
```
docker run -t -i --privileged -v /dev/bus/usb:/dev/bus/usb -d --name=asterisk -d -p 5060:5060 ssmonarch/asterisk-dongle
```
With current versions of docker, you can use the --device flag to achieve what you want, without needing to give access to all USB devices. For, example, if you wanted to make only /dev/ttyUSB0 accessible within your docker container, you could do something like:
```
docker run -t -i --device=/dev/ttyUSB0
```
----------
**dongle.conf**
```
[general]
interval=15 ; Number of seconds between trying to connect to devices
;------------------------------ JITTER BUFFER CONFIGURATION --------------------------
;jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a
; Dongle channel. Defaults to "no". An enabled jitterbuffer will
; be used only if the sending side can create and the receiving
; side can not accept jitter. The Dongle channel can't accept jitter,
; thus an enabled jitterbuffer on the receive Dongle side will always
; be used if the sending side can create jitter.
;jbforce = no ; Forces the use of a jitterbuffer on the receive side of a Dongle
; channel. Defaults to "no".
;jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds.
;jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is
; resynchronized. Useful to improve the quality of the voice, with
; big jumps in/broken timestamps, usually sent from exotic devices
; and programs. Defaults to 1000.
;jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a Dongle
; channel. Two implementations are currently available - "fixed"
; (with size always equals to jbmaxsize) and "adaptive" (with
; variable size, actually the new jb of IAX2). Defaults to fixed.
;jbtargetextra = 40 ; This option only affects the jb when 'jbimpl = adaptive' is set.
; The option represents the number of milliseconds by which the new jitter buffer
; will pad its size. the default is 40, so without modification, the new
; jitter buffer will set its size to the jitter value plus 40 milliseconds.
; increasing this value may help if your network normally has low jitter,
; but occasionally has spikes.
;jblog = no ; Enables jitterbuffer frame logging. Defaults to "no".
;-----------------------------------------------------------------------------------
[defaults]
; now you can set here any not required device settings as template
; sure you can overwrite in any [device] section this default values
context=default ; context for incoming calls
group=0 ; calling group
rxgain=+3 ; increase the incoming volume; may be negative
txgain=-3 ; increase the outgoint volume; may be negative
autodeletesms=yes ; auto delete incoming sms
resetdongle=yes ; reset dongle during initialization with ATZ command
u2diag=-1 ; set ^U2DIAG parameter on device (0 = disable everything except modem function) ; -1 not use ^U2DIAG command
usecallingpres=yes ; use the caller ID presentation or not
callingpres=allowed_passed_screen ; set caller ID presentation by default use default network settings
disablesms=no ; disable of SMS reading from device when received
; chan_dongle has currently a bug with SMS reception. When a SMS gets in during a
; call chan_dongle might crash. Enable this option to disable sms reception.
; default = no
language=ru`enter code here` ; set channel default language
smsaspdu=yes ; if 'yes' send SMS in PDU mode, feature implementation incomplete and we strongly recommend say 'yes'
mindtmfgap=45 ; minimal interval from end of previews DTMF from begining of next in ms
mindtmfduration=80 ; minimal DTMF tone duration in ms
mindtmfinterval=200 ; minimal interval between ends of DTMF of same digits in ms
callwaiting=auto ; if 'yes' allow incoming calls waiting; by default use network settings
; if 'no' waiting calls just ignored
disable=no ; OBSOLETED by initstate: if 'yes' no load this device and just ignore this section
initstate=start ; specified initial state of device, must be one of 'stop' 'start' 'remote'
; 'remove' same as 'disable=yes'
exten=+1234567890 ; exten for start incoming calls, only in case of Subscriber Number not available!, also set to CALLERID(ndid)
dtmf=relax ; control of incoming DTMF detection, possible values:
; off - off DTMF tones detection, voice data passed to asterisk unaltered
; use this value for gateways or if not use DTMF for AVR or inside dialplan
; inband - do DTMF tones detection
; relax - like inband but with relaxdtmf option
; default is 'relax' by compatibility reason
; dongle required settings
[dongle0]
audio=/dev/ttyUSB1 ; tty port for audio connection; no default value
data=/dev/ttyUSB2 ; tty port for AT commands; no default value
; or you can omit both audio and data together and use imei=123456789012345 and/or imsi=123456789012345
; imei and imsi must contain exactly 15 digits !
; imei/imsi discovery is available on Linux only
imei=123456789012345
imsi=123456789012345
; if audio and data set together with imei and/or imsi audio and data has precedence
; you can use both imei and imsi together in this case exact match by imei and imsi required
```
**extensions.conf**
```
; this is chunks of Asterisk extensions.conf file for show some chan_dongle features
[general]
[dongle-incoming]
; example of ussd receive
exten => ussd,1,Set(type=${USSD_TYPE})
; values from 0 till 5
; 0 - 'USSD Notify'
; 1 - 'USSD Request'
; 2 - 'USSD Terminated by network'
; 3 - 'Other local client has responded'
; 4 - 'Operation not supported'
; 5 - 'Network time out'
exten => ussd,n,Set(typestr=${USSD_TYPE_STR})
; type in string, see above
exten => ussd,n,Set(ussd=${USSD})
; USSD text, but may be truncated by first \n
exten => ussd,n,Set(ussd_multiline=${BASE64_DECODE(${USSD_BASE64})})
; USSD text, may be multiline
; Note: this exten run in Local channel not attached to anything, also all CALLERID() is empty
exten => ussd,n,Hangup
; example of sms receive
exten => sms,1,Set(sms=${SMS})
; SMS text, but may be truncated by first \n
exten => sms,n,Set(sms_multiline=${BASE64_DECODE(${SMS_BASE64})})
; SMS text, may be multiline
exten => sms,n,Set(raw_cmgr_message=${CMGR})
; raw CMGR message from dongle
; Note: this exten run in Local channel not attached to anything, also CALLERID(num) is address of SMS originator
exten => sms,n,Hangup
; example of begining context execution from not default exten
exten => +12345678901,1,Verbose(This exten executed if Subscriber Number is available and equal +12345678901 or exten setting value is +12345678901)
exten => +12345678901,n,Hangup
; example of channel variables setting by chan_dongle
exten => s,1,Set(NAME_OF_DEVICE=${DONGLE0_STATUS})
; for example 'dongle0' or 'dongle1' see dongle.conf
exten => s,n,Set(NAME_OF_PROVIDE=${DONGLEPROVIDER})
; for example see output of cli 'dongle show devices' column "Provider Name"
exten => s,n,Set(IMEI_OF_DEVICE=${DONGLEIMEI})
; for example see output of cli 'dongle show devices' column "IMEI"
exten => s,n,Set(IMSI_OF_SIMCARD=${DONGLEIMSI})
; for example see output of cli 'dongle show devices' column "IMSI"
exten => s,n,Set(SUBSCRIBER_NUMBER=${DONGLENUMBER})
; Subscriber Number example see output of cli 'dongle show devices' column "Number"
; may be empty, use for save in SIM commands AT+CPBS="ON" and AT+CPBW=1,"+123456789",145
exten => s,n,Set(CNUM_NUMBER=${CALLERID(dnid)})
; Set to Subscriber Number if available
; applications of chan_dongle
exten => s,n,DongleStatus(dongle0,DONGLE0_STATUS)
exten => s,n,DongleStatus(g1,DONGLE1_STATUS)
exten => s,n,DongleStatus(r1,DONGLE2_STATUS)
exten => s,n,DongleStatus(p:PROVIDER NAME,DONGLE3_STATUS)
exten => s,n,DongleStatus(i:123456789012345,DONGLE4_STATUS)
exten => s,n,DongleStatus(s:25099,DONGLE5_STATUS)
; for first argument see Dial() Resource part of dial string
; get status of device and store result in variable
; possible values of ${DONGLE0_STATUS}
; -1 invalid argument
; 1 device not found
; 2 device connected and free
; 3 device connected and in use
exten => s,n,DongleSendSMS(dongle0,+18004005422,"Hello how are you, Danila?",1440,yes)
; send SMS on selected device and to specified number
; device name of Dongle device
; destination number in International format with leading '+' or w/o leading '+'
; message maximum 70 UCS-2 symbols
; validity period in minutes, will be round up to nearest possible value, optional default is 3 days
; report request if true report for this SMS is required, optional default is not
; functions of chan_dongle
exten => s,n,GotoIf($["${CHANNEL(callstate)}" = "waiting"]?waiting-call)
; now we provide channel function argument callstate
; possible values
; active ; enjoy and speek
; held ; this call is held
; dialing ; for outgoing calls
; alerting ; for outgoing calls, number dialed and called party ringing
; incoming ; for incoming calls
; waiting ; for incoming waiting calls;
; if callwaiting=no channels for waiting calls never created
; initialize ; never appear
; released ; never appear
; Answer on waiting call activate this call and place any other active calls
; on hold, but execution of dialplan for these calls not break stopped or frozen
; When active call terminated one of held becomes active.
exten => s,n,Set(CHANNEL(callstate)=active)
; if callstate is 'held' you can assign new value 'active'
; its mean activate this call and place on hold all other active calls but
; execution of dialplan for these calls not break stopped or frozen
exten => s,n,GotoIf($["${CHANNEL(dtmf)}" != "off"]?turn_off_dtmf)
; you can read actual value of DTMF detection settings
; possible values
; off ; DTMF detection is off
; inband ; detect DTMF inband
; relax ; detect DTMF inband with relax option as defined in main asterisk docs
exten => s,n,Set(CHANNEL(dtmf)=off)
; example usage of assign to channel local DTMF settings
; this not overwrite global config file settings and apply only for this channel
exten => s,n,Dial(Dongle/dongle0/+79139131234)
exten => s,n,Dial(Dongle/g1/+79139131234)
exten => s,n,Dial(Dongle/r1/879139131234)
exten => s,n,Dial(Dongle/p:PROVIDER NAME/+79139131234)
exten => s,n,Dial(Dongle/i:123456789012345/+79139131234)
exten => s,n,Dial(Dongle/s:25099/+79139131234)
; make outgoing call
; name on device with this name
; g1 on first free device in group 1
; r1 round robin devices in group 1
; p: with first free device with Operator name beggining with name
; i: with device exactly matched IMEI
; s: with first free device with IMSI prefix
exten => s,n,Dial(Dongle/g1/holdother:+79139131234)
exten => s,n,Dial(Dongle/r1/holdother:+79139131234)
exten => s,n,Dial(Dongle/p:PROVIDER NAME/holdother:+79139131234)
exten => s,n,Dial(Dongle/i:123456789012345/holdother:+79139131234)
exten => s,n,Dial(Dongle/s:25099/holdother:+79139131234)
; now we add option 'holdother' for dialing
; this option do
; 1) When looking for available devices by group, provider IMEI,
; IMSI prefix not ignore devices with whose state does not
; prohibit a new outgoing call when other call place on hold
;
; 2) Before actual dialing place active calls on hold
; but execution of dialplan for these calls not break stopped or frozen
; 3) This call will be active if succesfully answered
; BUG !!!
; tested for call waiting and hold features Huawei E1550 has a next bug:
; When local side hangup any call including held call ALL other calls LOST sound
; When remove side hangup active call ALL other calls LOST sound
; Please double check true this for you or not
; If true reduce usage of this useful features
exten => s,n,Dial(Dongle/g1/conference:+79139131234)
exten => s,n,Dial(Dongle/r1/conference:+79139131234)
exten => s,n,Dial(Dongle/p:PROVIDER NAME/conference:+79139131234)
exten => s,n,Dial(Dongle/i:123456789012345/conference:+79139131234)
exten => s,n,Dial(Dongle/s:25099/conference:+79139131234)
; and also option 'conference' added
; this option do
; 1) When looking for available devices by group, provider IMEI,
; IMSI prefix not ignore devices with whose state does not
; prohibit a new outgoing call when other call place on hold
;
; 2) Before actual dialing place active calls on hold
; but execution of dialplan for these calls not break stopped or frozen
; 3) If answered attach hold calls to conrefence (in term of GSM)
; Also if created outgoing channel place call on same device that incoming channel
; both incoming and outgoing channels become readonly to avoid the voice loop.
;
; see also BUG !!! note above
exten => s,n,Hangup
```